P3D & FSX Products

Hi Old John,

FSX Steam Edition with Windows 64

I have been flying the Fokker F27 since the end of August 2020 and have never had a problem with the ignitors not working individually.

For the Auto Pilot Trim switch I have never used as I like to watch the "Primary Displays" when making any changes so use buttons on my Joystick. Having said that I have had problems with the pitch, when descending at approximately 1,000 ft/min with the "Airspeed" hold on in the Autopilot, suddenly for no apparent reason the plane will go into a steep dive followed by a steep climb and carry on doing this until I switch off the Autopilot and regain control. I did contact Just Flights support team who tried to replicate it but couldn't so have put it down to my piloting.

Grizlee

Hi Derek.
Thanks for the recommendations. The first of the 2 is probably the best at least it got me flying the S340. But I still think Carenado's PDF files are not as good as the ones with Just Flight's aircraft. I also wonder why they can't put check lists on the kneeboard as this would make it flyable in VR.
John Caselton

Thanks Ray, I'll try that and see what happens

Capt. G

https://support.justflight.com/en/support/solutions/articles/17000067381-l-1011-tristar-professional-changelog

@North_Star Hi.
Have you got the navigraph main data update from navigraph , if so then you flight plan has to be entered manually via the CDU , as per the manual , which can be found in FSX under Carenado its in the first PDF page 5 is the start , it is not a very friendly CDU and is a bit quirky , its a while since i last flew this aircraft , the systems dont work fully as they should , and it does take a bit of getting used to , and watch you CG very carfully as its twitchy in pitch .
regards alan cottrill.

Hi Alan

I've got this running in P3Dv4.5

The parkingbrake leaver is to the right when brakes are on (I don't know if this is correct or not).

Undercarriage lever is down when undercarriage down

Engine start buttons don't seem to stick

A white mark would be useful, tool tips does say which is selected (1,2 or off), but I imagine some don't like that being on for immersion reasons.

Doesn't seem to be a hole in the wing on the p3d model

I remember having this problem before. I think it was something to do with locking the two fuel cocks (with the middle mouse click) after turning to number 2 tanks. I was using a mouse with a fancy middle button and I could never start the engines (this was back when I was using FSX:SE with the Lancaster). I borrowed a really cheap standard mouse and the middle click on that would activate the cocks. It's hard to know if that will be the problem for you as there doesn't seem to be any sound or visual indicator that the cocks are locked, which would be helpful.
I've just tried 3 different mice in p3dv4 (including the one I used to have problems with) and they all seem to work (pressing manual start and then trying to start up), but can't say whether that is due to p3d or something else as I have a different system entirely now.
I remember a post on the old forum having similar issues with the middle click of the cocks [http://forum.justflight.com/forum_posts.asp?TID=32497&title=ah-lancaster-cold-start-12-port-wont-start](link url)
If your props are turning, but the engines aren't catching it might be that.

7-10 - I haven't tried to use the autopilot or fuel system or guns.

Hope that's of some help.

AH2 doesn't prevent use of the autopilot during type rating flights, or any flights.

@tedban If they don't work or it doesn't work to your satisfaction yep you'll be able to get a refund. Might be worth contacting our support team to see if they can help you out to begin with though.

You'll also need to let them know the exact product you're referring to, 1_11. Flight sim software doesn't really narrow it down very much.

Support can be contacted here: https://support.justflight.com/en/support/home

@tucanto said in DC F15 Eagle:

Thanks for your reply , (interesting detail) but I do not have the inclination to go in to all the technicalities,
I just thought I would mention it, it's no big deal I just apply the brakes occasionally.

Delta558 is correct - aircraft such as the F-15 have such a high thrust-to-weight ratio that they'll easily taxi under even heavy loadouts when under idle thrust. Just the nature of the beast. Some airplanes have internal controls to limit thrust when taxiing but I'm not aware of one for the F-15, so toe-brake dabbing is required I'm afraid.

I have had this aircraft from FSX days and did not have the patience to lock with the tanker but got close.
Can not see the tanker in P3D V5 ?

Great to see it`s working.

Thank you for your support.

OKay, thank you.

I have resolved the issue. Previously I installed an earlier version (not v5 compatible) and forced the installer to the Prepar3d v4 directory. Then running the 2.02 installer without uninstalling resulted in the error.

To solve the problem I installed the earlier version first and then I ran the 2.02 installer. Now it asks for the P3D version and installs in the proper directory. Problem solved.

Jelle

I guess Just Flight isn't updating these addon Packs to P3Dv5?
Seems a shame, I enjoy the FB version in v5 and would like to see the Recon and Bomber versions!