PA-28R Arrow III

@Lemny
Have a look on Axis and Ohs from Lorby, with that (payware) you could program your HOTAS to change the frequency directly!

@weptburrito ah, thanks for the info. Bought this gem of a plane for the pure old school feeling anyway. Looked for a steam gauge only version a GA plane and got the best plane on the marked with exactly this feature. Love it…

@sdvpilot said in Weird behaviou at rolling... Just before takeoff.:

unless

thx for testing!

I have done touch and go’s with live weather, 10 knots crosswind, and I noticed that first take off and landing went very well. After landing and full stop on the runway, the next take off was far more challenging due to the erratic move at 70 knots. Also the third was difficult. I Anyone else noticed this?

Bump for visibility. Are there plans to fix this?

https://community.justflight.com/topic/2139/weird-artifact-occluding-the-gps100

You can tune down the engine sounds in the audio settings, but I found that wind noise is still so loud, the tuned down engine sound makes no difference. But I am sure the NAV sounds are far to quiet to be recognized in flight. I don't know if that's a real problem of the Arrow and adds to the realism :-) but I don't like it nonetheless.

@vcapra1
The horn is still there, but it doesnt match any AOA I am used to. Do you get it with normal landings?

We're using the default DME speed variable for the KN62 so any potential bugs with that value will need to be reported to Asobo.

Thanks Martyn,
Your instructions worked fantastic.

My screenshots no longer look comical to me with those huge numbers.
Why experimental aircraft can have 3 inch numbers but certified ones need 12 inch numbers is beyond me .

Anyways, thanks again.......:thumbs_up:

Piper2.png

@vcapra1 There currently is no GPS unit in the sim that will give you anywhere near the same behaviour as the real units. I'm not sure if the sim allows to have the second GPS unit routed to NAV2, but I do know that you cannot have 2 separate flight plans.

@RetiredMan93231 thank you, I will take a look at it.

Custom-coded workarounds have had to be used due to the sim not handling mechanical radio selectors very well (i.e. the ability to physically select a frequency but that frequency not to become tuned until the radio is powered). I'll see if we can refine the code to handle this use case better.

This should be fixed in the next update.