PA-28R Turbo Arrow III/IV

@stefan_jat Pressure altitude was around 15,000ft. Density altitude around 17,000ft. The weight was at about 80% of full load.

The maximum allowed MP is 41in, but the maximum MP goes higher than that at sea level, hence the need for an overboost warning. Also, maximum pressure should and does go down with altitude. My question is if 36in of MP is normal at 15,000ft.

Thank you.

@cristi-neagu yes

Bump.

Still waiting for PCA to update to the latest version although they told me this would be done.

@gabe777

I've since noticed that there is a keystroke that can toggle auto rudder on and off... which is useful for taking off and landing.

Activating auro rudder once off the ground gives us the coordinated turns, but can then be deactivated for "spectactular" crab landings... of which I am, of course, extremely proficient ... 🥴🤣🤣🤣

@complete-beginner

With the battery master switched on, it should just be a case of pressing this half of the power button. It will need multiple presses to increase the brightness.

GPS100.png

@richavery Replying to an old thread. Thanks for the lead. Will elaborate here in case it helps someone else. I'm flying a Just Flight Turbo Arrow IV. The rotary thumb wheel thing on the left side of the switch panel says "NAV LIGHTS" and "RAD LIGHTS" beside it. You have to look carefully. Indeed it turns on lights on the panel and the exteriour navigation lights. Cool. Peter

Agreed, the Arrows are my most flown planes.

@jcallum You can now download the latest version of all the PA28s from your Just Flight account to fix this issue

@martyn Ughh . They take forever to update stuff.

@phil7789 said in NAV1 not receiving VOR:

I assume this could be more on Navigraphs side as they also implement VORs as far as I've know / seen it. I double checked my content.xml and the fs-base-nav is disabled while only the Navigraph data is active.

I hadn't thought of that. I'm using Navigraph as well so you could be right there.

@martyn

Thanks! With some help from WeptBurrito I was able to make adjustments to those files. There are some before and after screenshots in this thread.

https://forums.flightsimulator.com/t/just-flight-arrows/503806/55?u=tacobandito27

@martyn YES! This is it! Legacy mode let me switch and enter 0.05 MHz digits.
Thanks a lot for your advice, Martyn.

Thanks for reporting this issue. This will be fixed in the upcoming PA28 updates.

@jdelites Having similar issues recently..

The Information you shared above is great. I have been reading all you shared here. In this you explained everything very well. If i want any further guideline we will contact you here https://community.justflight.com/topic/2323/oxygen/teatime/18.
Thanks

Hello. I also have the problem that when I turn on the battery, the GTN 750 does not start. It only starts if I access it from the toolbar. I have tried several times and it has only worked once. I don't know why on that occasion it did start and on the rest it didn't. With other planes I have no problem with this GPS. What could be the problem?
Note: I have no problem with the rest of the plane's GPS, only with this one.

@solstafir Thanks for reporting this issue. We'll get these fixed in the next update.