PMS50 GTN750 not working.
-
The GTN750 loads and looks right, but the plane just "sits" on the runway on the map.
-
Are you using the Turbo Arrow III/IV or the Arrow III & Turbo Arrow bundle?
-
I have a similar problem, in that the GTN 750 is simply not an option. However, it does work in the standard C208B.
I purchased the bundle. I use the Addon Linker to link to the GTN 750 base program. I do not use the professional version.
Besides having the GTN 750 base program in the community folder, is there anything else I need to do?
-
This will be fixed in the next update. Apologies for the inconvenience!
-
@Martyn I am using the Turbo Arrow III/IV. Not the bundle. It works fine in the non-turbo Arrow III.
-
Just wanted to report back that the latest update solves both my GTN750 and GNS 430/530 issues with the bundle. All three are working now.
Thank you for the quick turn around!
-
hello, after the update i cannot select the squawk code anymore with GTN 750. Could this be because of the fix?
-
My gtn 550 is still not working. I didn't buy the bundle but I bought both planes. Whole gtn 550 screen is frozen still after 1.1 update.
-
@Daytona125 Yes same issue with my plane even after the update.
-
I've just tested the GTN 750 with the latest version of the Turbo Arrow and the transponder and map work fine.
Please uninstall the Turbo Arrow, redownload and install the latest version, and make sure you are using the latest version of the PMS GTN 750.
-
Any problems here with GTN750.
