Various requests

Jannik Stein

Hello,
Sorry in advance for this flood of requests but I recently started flying the TBM and I always have a lot to complain about... please don't take the critic to hard, overall the TBM is awesome!

// RVSM Certification
I'd love to see a RVSM Capable TBM added in the future. For Operating in RVSM Airspace you need two seperate RVSM capable altimeters. According to the TBM850 Manual only the AM250 is certified for that in the TBM so you need two of them, which many real world TBM's actually have.

//Autopilot discrepancies

Pressing the Autopilot "Test" Button should iluminate all lights on the KMC321 and "Trim" should flash. When completed the "AP" annunciator should flaps and a tone should be played.
Engaging Go Around Mode should disengage the AP
3: In Cruise flight the autopilot always conquers crosswind with a dropped wing. Shouldn't it increase the crab angle to keep wings level? This even happens at low wind speeds like 15kt. Furthermore it can't seem to stay on course but always ends up like 1/2nm on the downwind side

//Panel States
I'd really appreciate if you could change some default (Apron) switch positions to reflect the real life operating procedures:

Tank Selector Off
Prop Governor Feather
Fan Flow Auto
Shadin Engine Monitor Page to Fuel Flow
Rudder Trim in Takeoff Position instead of Neutral
(6. It would be cool if the OAT Indicator could save the Unit)

//Miscellaneous

It would be cool if there was some clickspot for the Overspeed Governor Test... it's kinda annoying having to look down on takeoff. Either a clickspot on the Panel or maybe even support for a keybind would be very appreciated
It would be cool if you could add Window Shades and Tray Table animation.
The "Starter" Annunciator should flash during both Advisory Panel Tests.
It would be cool to see more features added to the EFS40 especially the different Navigation Map modes. This is a bigger one but stuff like ARC Nav Map (with WX) would be very useful.

All the information I have is from the TBM850 manual but feel free to correct me if something is wrong.
I know the TBM is an old product and I'm expecting a lot but it would be cool if it could receive some love.

Kind Regards,
Jannik S.