Turbine Duke Reversers
-
Hello,
I am trying to activate the reversers on the throttel axis, but no luck. In Dev.Mode/Inspector I see that when I pull the throttle all the way back into the last detent (with the mouse), the axis value goes to zero. But no matter what I try in Spad.neXt, I can not get the reverser to engage when the physical throttle is pulled all the way back.
Is there a dedicated variable to engage the reverser? Or any other tips or hints?
Thanks in advance! -
There is nothing special about the reverse axis in my aircraft compared to any other. Assuming you're on the ground, it shouldn't be the safety interlock that prevents entering the beta range during flight (which can be disabled from the tablet's options page). Perhaps someone else will have some Spad specific advice, but if you continue to have trouble, perhaps sharing a video might help? Let me know if there is anything else I can do to help in the meantime!
-
There is nothing special about the reverse axis in my aircraft compared to any other. Assuming you're on the ground, it shouldn't be the safety interlock that prevents entering the beta range during flight (which can be disabled from the tablet's options page). Perhaps someone else will have some Spad specific advice, but if you continue to have trouble, perhaps sharing a video might help? Let me know if there is anything else I can do to help in the meantime!
@Black-Square said in Turbine Duke Reversers:
There is nothing special about the reverse axis in my aircraft compared to any other.
Thanks for the quick reply!
I will try to assign the lowest range of the physical throttle axis output to a reverser axis.Will report the results here!
