<![CDATA[Turbine Duke Reversers]]>Hello,

I am trying to activate the reversers on the throttel axis, but no luck. In Dev.Mode/Inspector I see that when I pull the throttle all the way back into the last detent (with the mouse), the axis value goes to zero. But no matter what I try in Spad.neXt, I can not get the reverser to engage when the physical throttle is pulled all the way back.

Is there a dedicated variable to engage the reverser? Or any other tips or hints?
Thanks in advance!

]]>https://community.justflight.com/topic/10735/turbine-duke-reversersRSS for NodeFri, 26 Jun 2026 20:56:36 GMTFri, 26 Jun 2026 09:30:21 GMT60<![CDATA[Reply to Turbine Duke Reversers on Fri, 26 Jun 2026 16:39:30 GMT]]>@Black-Square said in Turbine Duke Reversers:

There is nothing special about the reverse axis in my aircraft compared to any other.

Thanks for the quick reply!
I will try to assign the lowest range of the physical throttle axis output to a reverser axis.

Will report the results here!

]]>https://community.justflight.com/post/51288https://community.justflight.com/post/51288Fri, 26 Jun 2026 16:39:30 GMT<![CDATA[Reply to Turbine Duke Reversers on Fri, 26 Jun 2026 16:36:04 GMT]]>@jmarkows said in Turbine Duke Reversers:

Use Throttle 1 Axis (0-100) as your bind instead of Throttle 1 Axis

Thanks!
But I am using Spad.neXt, so all axes in the FS24 controller section are disabled.

]]>https://community.justflight.com/post/51292https://community.justflight.com/post/51292Fri, 26 Jun 2026 16:36:04 GMT<![CDATA[Reply to Turbine Duke Reversers on Fri, 26 Jun 2026 11:05:48 GMT]]>Use Throttle 1 Axis (0-100) as your bind instead of Throttle 1 Axis

]]>https://community.justflight.com/post/51251https://community.justflight.com/post/51251Fri, 26 Jun 2026 11:05:48 GMT<![CDATA[Reply to Turbine Duke Reversers on Fri, 26 Jun 2026 10:07:39 GMT]]>There is nothing special about the reverse axis in my aircraft compared to any other. Assuming you're on the ground, it shouldn't be the safety interlock that prevents entering the beta range during flight (which can be disabled from the tablet's options page). Perhaps someone else will have some Spad specific advice, but if you continue to have trouble, perhaps sharing a video might help? Let me know if there is anything else I can do to help in the meantime!

]]>https://community.justflight.com/post/51238https://community.justflight.com/post/51238Fri, 26 Jun 2026 10:07:39 GMT