Turbine Duke
-
I just purchased the Turbine Duke and I'm having problems getting off the ground. The engines don't seem to be getting any fuel. This is true whether I do a cold start or begin on a runway. The rpm doesn't change as I increase the throttle and eventually the batteries drain and everything goes dead. This happens on the runway so I assume all of the controls are already configured for flight. What am I missing? I'm running FS2020 in free flight mode.
-
I've flown the Turbine Duke in both 2020 and 2024 and haven't had this problem. I'd probably try reinstalling. Having said that, you will likely get better responses in the Dukes forum: link text
-
M Mark moved this topic from Just Chat
-
I almost thought this was a duplicate, because we just had a nearly identical post a day or two ago. Here was my response:
"Every time I have seen a similar complaint, the cause has been destroyed engines (usually due to improper starting procedure). Check the engine health bars on the upper right of each engine visualizer page. If they are at 100%, then we can troubleshoot further. A video or screenshots might help at that stage."
If that's not the problem, let me know and we will troubleshoot together.
