No traffic at arrival airport
-
When not using toolbar but Traffic Control Center: Do you leave the TCC program open during the flight?
JF will solve the problems. It makes no sense bringing small updates over and over again.
For a lot of users, FST doesn't work correctly because of other 3th part stuff or whatever. JF is looking on this, i am sure. At the moment FSLTL is the best way to go.
Again. If you have healthy ears, don't mix FST with FSLTL. Because the sound is bugged! If you don't care about sounds, than try it.
-
I did some testflights tonight and finally I got it to work some how to get traffic at my destination!!!
The problem before was, that the in game toolbar ist not working at all on my system!
I got traffic at my destination when I do the follwoing things:- plan the flight with(!) destination in MSFS
or - using traffic control centre without the toolbar
Conclusion:
Don't use the toolbar!!!
Don't press confirm in toolbar!!!Downside of all this:
I was not able to change my destination during or after my flight!
Either with the toolbar (as I said it doesn't work for me at all!) nor with traffic control centre.
Traffic was always still at my first destination.So dont't play around, just set your destination before flight and life with that. Then you (might) have traffic at your destination.
I thought we would by more flexible :-(
I still don't understand the philosphy and the mechanics behind all this, but maybe after a few fixes we get what we expected.
I keep fingers crossed!@steve67 I can confirm this works (entered destination in MSFS, then start flight, open FS Toolbar, wait few seconds, destination ICAO appears, close). I did NOT press confirm.
Hat a full EBBR when arriving.
Sure this will get fixed with the next update (or hopeful…)
- plan the flight with(!) destination in MSFS
-
@steve67 I can confirm this works (entered destination in MSFS, then start flight, open FS Toolbar, wait few seconds, destination ICAO appears, close). I did NOT press confirm.
Hat a full EBBR when arriving.
Sure this will get fixed with the next update (or hopeful…)
@balzbac Excellent!
I did a little flight from Philadelphias KPHL into D.C.s KDCA. I did the same as you, but no traffic on arrival this time (even >5000ft & >250kts) :-(
I don't know what I messed up this time!
Think I have to live with that until the next update. We'll see (and hope!). -
Is there any way you guys could release it as a beta? I don't always have traffic at the destination airport either. And so I could say whether it works for me or not.
Best regards -
Is there any way you guys could release it as a beta? I don't always have traffic at the destination airport either. And so I could say whether it works for me or not.
Best regards@baxterchico said in No traffic at arrival airport:
Is there any way you guys could release it as a beta? I don't always have traffic at the destination airport either. And so I could say whether it works for me or not.
Best regardsI wouldn’t want them to release a patch as a beta. We had beta testers for the main game itself. That didn’t seem to stop even the most blatant of issues. So I’d rather they released the patch when it’s ready for full release.
-
@balzbac Excellent!
I did a little flight from Philadelphias KPHL into D.C.s KDCA. I did the same as you, but no traffic on arrival this time (even >5000ft & >250kts) :-(
I don't know what I messed up this time!
Think I have to live with that until the next update. We'll see (and hope!).@steve67 Did Brussels to Zurich: Did everything the same except that when I landed in Zurich: Empty! No wait… there was 1 Iberia A320… really weird as until a few days ago everything worked „well“ i.e. full destination airports)… also unclear how traffic gets spawned and how the destination confirm thing works and how the en-route traffic works… questions… waiting keenly for the update as I think has potential.
-
Do you think this might have something to do with having rolling cache, on or off settings. ie if it's on, does that stored info muck up what happens when we fly into the destination and how FStraffic wants to inject traffic
-
Do you think this might have something to do with having rolling cache, on or off settings. ie if it's on, does that stored info muck up what happens when we fly into the destination and how FStraffic wants to inject traffic
@hunterdouglas said in No traffic at arrival airport:
Do you think this might have something to do with having rolling cache, on or off settings. ie if it's on, does that stored info muck up what happens when we fly into the destination and how FStraffic wants to inject traffic
Have you tried it with cache on and off?
-
@hunterdouglas said in No traffic at arrival airport:
Do you think this might have something to do with having rolling cache, on or off settings. ie if it's on, does that stored info muck up what happens when we fly into the destination and how FStraffic wants to inject traffic
Have you tried it with cache on and off?
@bpfonteyn said in No traffic at arrival airport:
first I left it on, but cleared it out, flew into KBOS plenty of aircraft. I then turned it off and flew into KBOS again, only a couple of aircraft. Then repeated both options, with it on, next time no traffic, with it off, no traffic. So it's still not the answer, it's always hit or miss for me, sometimes it works, other times no. I'm very tired of it now, I reckon I've done more testing of it than the beta guys ever did. hopefully the promised patch they say is due out this week will work
-
@bpfonteyn said in No traffic at arrival airport:
first I left it on, but cleared it out, flew into KBOS plenty of aircraft. I then turned it off and flew into KBOS again, only a couple of aircraft. Then repeated both options, with it on, next time no traffic, with it off, no traffic. So it's still not the answer, it's always hit or miss for me, sometimes it works, other times no. I'm very tired of it now, I reckon I've done more testing of it than the beta guys ever did. hopefully the promised patch they say is due out this week will work
@hunterdouglas said in No traffic at arrival airport:
@bpfonteyn said in No traffic at arrival airport:
...the beta guys ever did ...
snort of derision :grinning_squinting_face:
We're all hoping for a patch this week. I can quite imagine it's been quite a stressful time in JF HQ since the release of Traffic. Hopefully before the release of Kerbal Space Program 2 (EA) on Friday. :grinning_cat_face:
-
I hope you are making good progress. It's really frustrating that I often have no traffic at the destination airport.
-
So we are what....30+ days in. Still no aircraft at arrival airport. I'll see aircraft at departure and like 30 minutes after I'll see aircraft arriving at my departure....sometimes. I'll see the occasional aircraft enroute...but I never see aircraft landing or taxing and barely ever at a gate at my destination airport....STILL. It's getting a little frustrating. I've put in a ticket quite awhile ago and given the required data asked for and haven't heard back since. Sigh. I do like me JF products but this one is more frustrating than the norm.
-
So we are what....30+ days in. Still no aircraft at arrival airport. I'll see aircraft at departure and like 30 minutes after I'll see aircraft arriving at my departure....sometimes. I'll see the occasional aircraft enroute...but I never see aircraft landing or taxing and barely ever at a gate at my destination airport....STILL. It's getting a little frustrating. I've put in a ticket quite awhile ago and given the required data asked for and haven't heard back since. Sigh. I do like me JF products but this one is more frustrating than the norm.
@xtreme33guitar said in No traffic at arrival airport:
So we are what....30+ days in. Still no aircraft at arrival airport. I'll see aircraft at departure and like 30 minutes after I'll see aircraft arriving at my departure....sometimes. I'll see the occasional aircraft enroute...but I never see aircraft landing or taxing and barely ever at a gate at my destination airport....STILL. It's getting a little frustrating. I've put in a ticket quite awhile ago and given the required data asked for and haven't heard back since. Sigh. I do like me JF products but this one is more frustrating than the norm.
Totally understand your frustration. We are equally frustrated. FST worked fine for our large testing group and is also working for most users. It would have been impossible to release a traffic program that had no arrival traffic. But, it is clear that some users are getting a different experience to others and, for them, it is a traffic program with no traffic! We are working hard to nail whatever it is that causing these isolated problems with arrival traffic and thank you for completing the log for us. These logs are helping to find a common denominator and the latest build of an update is being tested at the moment.
-
So we are what....30+ days in. Still no aircraft at arrival airport. I'll see aircraft at departure and like 30 minutes after I'll see aircraft arriving at my departure....sometimes. I'll see the occasional aircraft enroute...but I never see aircraft landing or taxing and barely ever at a gate at my destination airport....STILL. It's getting a little frustrating. I've put in a ticket quite awhile ago and given the required data asked for and haven't heard back since. Sigh. I do like me JF products but this one is more frustrating than the norm.
I do understand your frustration. I too rarely get any arrival traffic, nor enroute traffic.
I sometimes get both when flying into EGLC, with the latter, enroute traffic, only being heard as I approach London.
Really wanting to keep JF Traffic installed, but as each day passes without a fix it’s becoming harder not to uninstall it and write it off as a wasted purchase. Simple Traffic is by no means the best traffic software, but at least it had plenty of enroute traffic and traffic at destination airports (and no “ghost airports”). 😢
-
I do understand your frustration. I too rarely get any arrival traffic, nor enroute traffic.
I sometimes get both when flying into EGLC, with the latter, enroute traffic, only being heard as I approach London.
Really wanting to keep JF Traffic installed, but as each day passes without a fix it’s becoming harder not to uninstall it and write it off as a wasted purchase. Simple Traffic is by no means the best traffic software, but at least it had plenty of enroute traffic and traffic at destination airports (and no “ghost airports”). 😢
@bpfonteyn
We're almost there with the update. We had hoped to release today, but it wasn't to be. It should be available early next week though.
Here is the current changelog for the update:Module: Departures now using correct callsign callouts Module: Destination airport detection revisions Module: New system for handling departures Module: Additional cruise AI scenarios added, plus increased randomness Module: Additional airports added to database Module: SF3 added to aircraft database Module: Remove traffic/Regenerate traffic system improvements Module: Bug when switching to an airport with no scheduled arrivals - fixed TCC: VMR template exporting/importing bug TCC: Right clicking headers in the TCC would cause a crash - fixed TCC: Localisation issue fixed Misc: In-sim menu not showing ICAO code when reopened during flight - fixed Fleet: Added Cebu (CEB) Pacific A320, 320_SL and A320_NEO, A321_SL, A321 NEO, a330-300, ATR72 Fleet: Added Air China 747-400 Fleet: Added Air New Zealand 777-300ER Fleet: Added Asiana 747-400 Fleet: Added Aurigny E195,ATR72 Fleet: Added Iraqi 747-400 Fleet: Added REX 737-800 Fleet: Added Singapore 777-300ER Fleet: Added Smart wings 737-800 Fleet: Added missing A320NEO textures. AVA, QDA,SKU,LAN,IBE Fleet: Colour matched BA fleet Fleet: Rebuilt Aircraft.CFG's to correct some callsigns Fleet: Updated wheel anim code Fleet: Added bogie tilt to A330-200/A330-300/747-400/747-8/787-8/787-9Subject to change before release, of course.
Thanks
Rich -
@bpfonteyn
We're almost there with the update. We had hoped to release today, but it wasn't to be. It should be available early next week though.
Here is the current changelog for the update:Module: Departures now using correct callsign callouts Module: Destination airport detection revisions Module: New system for handling departures Module: Additional cruise AI scenarios added, plus increased randomness Module: Additional airports added to database Module: SF3 added to aircraft database Module: Remove traffic/Regenerate traffic system improvements Module: Bug when switching to an airport with no scheduled arrivals - fixed TCC: VMR template exporting/importing bug TCC: Right clicking headers in the TCC would cause a crash - fixed TCC: Localisation issue fixed Misc: In-sim menu not showing ICAO code when reopened during flight - fixed Fleet: Added Cebu (CEB) Pacific A320, 320_SL and A320_NEO, A321_SL, A321 NEO, a330-300, ATR72 Fleet: Added Air China 747-400 Fleet: Added Air New Zealand 777-300ER Fleet: Added Asiana 747-400 Fleet: Added Aurigny E195,ATR72 Fleet: Added Iraqi 747-400 Fleet: Added REX 737-800 Fleet: Added Singapore 777-300ER Fleet: Added Smart wings 737-800 Fleet: Added missing A320NEO textures. AVA, QDA,SKU,LAN,IBE Fleet: Colour matched BA fleet Fleet: Rebuilt Aircraft.CFG's to correct some callsigns Fleet: Updated wheel anim code Fleet: Added bogie tilt to A330-200/A330-300/747-400/747-8/787-8/787-9Subject to change before release, of course.
Thanks
Rich -
-
please add cargo carriers! thanks!
@monkeypants Yus! :thumbs_up: I'd like to see more smaller aircraft.
I love the models but I find the implementation of FS Traffic limiting. I like to roam around (okay I get lost a lot!) and have traffic generated wherever I go and not have to worry about entering a destination which is why I currently prefer the FSLTL injector.
