No traffic at arrival airport
-
@gabe777 said in No traffic at arrival airport:
dea to only have traff
We will be supporting alternate destinations in flight asap.
The skies should be populated with cruise traffic during your flight. If you are not seeing any then please get in touch with support so they can look into it for you.@rich said in No traffic at arrival airport:
We will be supporting alternate destinations in flight asap.
Does this mean, (despite the manual: "The destination ICAO can be changed at any time during a flight, allowing for flights to alternate airports."!!) alternates doesn't work at all at the moment?!?
I thought this happens only on my system! :astonished_face: -
@jf-john said in Please give us some info and best practice about destination:
... there is a requirement that you pass 250knots at 5,000ft to activate the processing of the flightplans. When our attention turns to GA we'll look at
Did you pass 5,000ft and flew at least 250kts?
What worked best for me is to plan my flights in MSFS Worldmap including a destination, and don't change a thing!same issue here, i m making some test, i have a feeling (just a feeling) it has something to do with jetways. when i don’t use jetways for boarding (my plane!) at departure, i have traffic on arrival.
but again, might be a placebo, you know how wierd things are ! -
same issue here, i m making some test, i have a feeling (just a feeling) it has something to do with jetways. when i don’t use jetways for boarding (my plane!) at departure, i have traffic on arrival.
but again, might be a placebo, you know how wierd things are !@gogolito Hm, I never paid attention to be honest. Some of the quick testflights I did with the MB-339, so no boarding. When I use boarding and jetways, I even use GSX!!
- So, maybe using jetways is part of the object-limit (more objects in use when moving)?
- is the object-limit part of the whole flightsimsession (all objects from departure, during flight, 'til arrival?)?
- or is the object-limit only part of the actual scene (like what I "see" on screen right now?)?
-
@gogolito Hm, I never paid attention to be honest. Some of the quick testflights I did with the MB-339, so no boarding. When I use boarding and jetways, I even use GSX!!
- So, maybe using jetways is part of the object-limit (more objects in use when moving)?
- is the object-limit part of the whole flightsimsession (all objects from departure, during flight, 'til arrival?)?
- or is the object-limit only part of the actual scene (like what I "see" on screen right now?)?
-
if you enter dev mode and look into option / sim object, if there are nothing in red color here, them you don t exceed sim object limit
-
if you enter dev mode and look into option / sim object, if there are nothing in red color here, them you don t exceed sim object limit
-
Allright, I thought I know how to do it.
Tonight, flight from EDDN to EDDM, PMDG 737-700.- traffic at departure (arrivals and departures)!
- at arrival? Nothing, niente, nada, no aircrafts!! :angry_face:
- startet FSTL, lots of aircrafts at the gates
This software is driving me nuts!
-
Allright, I thought I know how to do it.
Tonight, flight from EDDN to EDDM, PMDG 737-700.- traffic at departure (arrivals and departures)!
- at arrival? Nothing, niente, nada, no aircrafts!! :angry_face:
- startet FSTL, lots of aircrafts at the gates
This software is driving me nuts!
-
@gogolito said in No traffic at arrival airport:
if you enter dev mode and look into option / sim object, if there are nothing in red color here, them you don t exceed sim object limit
Excellent, good to know! Thank you!
Steve, i have 100%success so far and this is how (it s something i ve read on another forum ) ;
once flight is loaded , open fs traffic toolbar and WAIT for the arrival ICAO to fill automatically.
then DO NOT press confirm. wait a few second and close it.
i also lowered time before departure to 90 minutes.
100% success -
Steve, i have 100%success so far and this is how (it s something i ve read on another forum ) ;
once flight is loaded , open fs traffic toolbar and WAIT for the arrival ICAO to fill automatically.
then DO NOT press confirm. wait a few second and close it.
i also lowered time before departure to 90 minutes.
100% success -
Thank you for all your feedback. It's so dissapointing, that the devs don't kick in and give us suggestions how it's done correct!
I think it's very important when you open the destination aka toolbar-window. I did it after takeoff and this is probably to late! I will do it next time before I even move my plane and will report. -
Thank you for all your feedback. It's so dissapointing, that the devs don't kick in and give us suggestions how it's done correct!
I think it's very important when you open the destination aka toolbar-window. I did it after takeoff and this is probably to late! I will do it next time before I even move my plane and will report.@steve67 said in No traffic at arrival airport:
Thank you for all your feedback. It's so dissapointing, that the devs don't kick in and give us suggestions how it's done correct!
I think it's very important when you open the destination aka toolbar-window. I did it after takeoff and this is probably to late! I will do it next time before I even move my plane and will report.They have, I’m sure. Certainly a dev stated that you should open the JF button on the toolbar and wait for the destination ICAO to auto-populate. This can take a moment or two.
Also there is the manual, which gives you two methods of flight planning.
They are aware of the issues.
-
@gogolito I certainly do not get 100% success on this suggestion. I have tried it myself.
-
@gogolito I certainly do not get 100% success on this suggestion. I have tried it myself.
-
Same issue for me as well. Have tested FSTraffic the entire weekend completing different flights of various durations on PMDG 737-800. A lot of traffic on departure airport and absolutely NO TRAFFIC at arrival airport.
Just Flight, fix your software as soon as possible!
-
Thank you for all your feedback. It's so dissapointing, that the devs don't kick in and give us suggestions how it's done correct!
I think it's very important when you open the destination aka toolbar-window. I did it after takeoff and this is probably to late! I will do it next time before I even move my plane and will report.@steve67 Hello,
Honestly its a little bit baffling why everyone is having different experiences. All of the suggestions above should work in theory. One thing I would suggest if using the toolbar option, is leaving it open for at least 20 seconds after confirming the destination.
You are correct about opening the toolbar, even if you used the MSFS flight planner, the toolbar should still be opened, preferably at the start of the flight but as long as its opened at some point well before the destination you should be good.
Are you familiar with MSFS's dev mode option at all. That can give us some pointers as to what might be going on.
-
Same issue for me as well. Have tested FSTraffic the entire weekend completing different flights of various durations on PMDG 737-800. A lot of traffic on departure airport and absolutely NO TRAFFIC at arrival airport.
Just Flight, fix your software as soon as possible!
@vanngster We are working on a major revamp of the system which should sort out the instability of destination traffic. As I said above its baffling why everyone seems to have different experiences however we believe that simplifying things under the hood should stop these issues.
In the meantime if you haven't already, please send a support ticket. Support will give you instructions to send you console log which should give us some idea what might be going on in your case.
-
Hi,
I will describe what I tried but with no luck. Interesting is that before Fs traffic update I had few traffic movement at destination airport not a lot but few.
I already sent ticket.1st procedure: I load into the flight wait a few seconds then I open Fs traffic toolbar enter destination ICAO confirm it- no traffic
2nd: I create flight plan in MSFS flight planner, load into the flight then I open Fs traffic toolbar wait for destination ICAO to auto populate in toolbar, confirm it- no traffic
3rd: the same as 2nd only this time I don't confirm it I just close toolbar- no traffic
4th: I disable Fs traffic toolbar, I load into the flight, enter destination ICAO in Fs traffic center- no traffic
5th: the same as the 4th only this time I enter destination in MSFS planner and in Fs traffic center- no traffic.
I feel like this software was not tested at all, because this issue is very common as seen on this forum and others..
-
@vanngster We are working on a major revamp of the system which should sort out the instability of destination traffic. As I said above its baffling why everyone seems to have different experiences however we believe that simplifying things under the hood should stop these issues.
In the meantime if you haven't already, please send a support ticket. Support will give you instructions to send you console log which should give us some idea what might be going on in your case.
@jf-john I submitted a support request 11 days ago and haven't heard anything back yet other than the standard do not reply email. What is the current turn around time for support tickets?
Cancel that, logged into the support ticket and found you did reply but had issues with my email.
