No traffic at arrival airport
-
I made a flight from EKBI (Billund, Denmark) to EKCH (Copenhagen, Denmark) in the PMDG 737-600.
I typed in EKCH and pressed "Confirm", but when I arrived at EKCH, there was no Traffic.
The trip is appr. 120 nm great circle line from EKBI to EKCH.
So far I have returned to FSTL...
-
Hello all.
Last night I did a very short checkride with PMDG 737-700 from KMIA to KFLL (both LatinVFR).
Time: Monday approx. 13:00 local time KMIA.
Traffic at KMIA, arrivals and departures, everything fine and smooth. I could even use GSX Pro!
After 45 minutes takeoff to KFLL. I confirmed several times my destination in the toolbar.
When I arrived at KFLL, I had very few traffic there (4 planes). More arrived, but no departures! :-(- the module itself is very unstable
- most of the time no traffic on the second, 3rd ... flight
- restarting the sim every time for additional flights is ridiculous
- no feedback in toolbar, when module is crashed
- no option to restart module without restarting the sim
- traffic and timetable don't fit
- no arrival-timetable in Traffic Control Centre
- map in routeplaner is not working
- ...
At the moment I'm (very) disappointed!
It was way easier for me to get AIG running, not to speak of FSTL!!
The only thing I wanted to have is nice and easy offline-traffic :-(Thank you and regards, Stefan
-
Just did a flight from London City to Heathrow......at takeoff, there was some aircraft parked...as I expected....I set my level of aircraft in the sim to be at 10 percent....with 100% of air traffic to be generated. Upon arrival 10 minutes later at Heathrow...there were no aircraft present....and I did make sure that Heathrow was correctly entered in the FS Traffic utility menue....and I confirmed its presence before I took off.
I find that the product works OK with the MSFS 2020 AI Traffic on line engaged....However, I am failing to see the tire smoke effect when twin engines land??...Not sure if this is a bug when using the online AI traffic within the simulator.
Overall, I hope that Just Flight expedites resolving the key issues...for me they include, waiting forever for traffic to back up from the gate and take off. ....as well as the lack of traffic at the arriving airport.
I hope that the developers ensure that all the special effects are operational....and increase the sound of outside traffic when one is in the cockpit.
Lastly, when flying on line within the simulator's AI traffic, i make sure to have generic traffic OFF in the traffic settings. This seems to help....and I hope Just Flight clarifies the correct settings for Traffic when one chooses to fly with the On Line AI Traffic settings provided by Osobo.
Hope to see and update soon....and I do agree with others....that as an early purchaser I would have expected these issues among others to have been caught in Beta testing.
-
Just tried the updated version. Still not working for me and it seems worst now i only get traffic on and off at the departure airport and if i see any parked aircrafts, its much less than what i had before.
I also noticed some aircrafts appear to be "invisible" as i can see the gates moving but no visiable aircraft.
-
Just tried the new update. Flying from KFLL to KMIA.
Traffic when I am taking off and in the air en route.
No traffic when I arrive. Even waited 5 minutes...and did a traffic regeneration, per the menu in game....but no aircraft shows up at KMIA.Per the change log.......does not seem that this update was intended to solve this problem?
-
@cadum I have the same issue. Beyond fed up with the lies the developers keep feeding us. There's serious issues and this software should have never been released. I will likely file a dispute with PayPal for a refund. If that doesn't work I will do a chargeback.
-
@johng1
I did another flight...this time from one Australian airport to another. This time I waited till I was en route to my destination before inputting by destination airport code.
To my surprise traffic appeared at my arrival airport as well as a good number of parked aircraft...my initial conclusion is that we need to be reasonably into our route before input of the arrival airport codeI was doing it on the runway as part of takeoff procedure...so..I will test more to see if this is the reason for having had no traffic upon arrival.
-
@cadum I've been getting traffic and putting in my destination during pre-flight. What I've witnessed with little nav map is that roughly 70-80 miles out FS Traffic will start injecting additional traffic specific to my destination airborne. Once I'm roughly 20-30 miles out it injects the parked ground traffic. So far this has been pretty consistent across the 4 flights I've taken today - though all of them have been 2 to 2.5 hours each.
I know they've commented that they wait until you get airborne and away from scenery etc to do processing - so it wouldn't surprise me if people still having issues may get some success by "kicking" it while at altitude.
-
-
@chanjkhk I seem to remember a comment somewhere from a dev that also said they don't generate traffic until you hit greater than 250 knots and 5000 feet, or something like that. So maybe the times you've seen traffic you've hit those milestones for the system? So if you are in something slower than a jet it might cause issues currently.
-
I've tried what's suggested above and still have no traffic. I've tried flying from KSEA to CYVR, nothing. I also used "slew" and increase my sim rate on a long haul flight, nothing. I've never had issues with FSLTL spawning AI traffic at the arrival airport so it makes no sense to jump through hoops to get AI to work properly. I also noticed the AI that is spawn during flight is just contrails, no AI plane. What a mess.
-
@johng1 if you are seeing contrails but no model it means you've hit the display limit for item in MSFS. They limit it to arround 1000 items per session. If you are using GSX in FS Traffic control centre try turning off some/all of the ground services and see if that enfluences anything.
On first run for me on release day I didn't do that and on pushback all the traffic that was there vanished!
-
-
@jasemelbo If you’re still having problems would you please send a ticket via the support page. FS Traffic is much more stable with the latest update but with so many different set ups and variables at play it’s inevitable that people may still experience some issues.
Support can help by gathering extra information so we can work out what is going on in the background to stop traffic from spawning.
John - Just Flight
-
@cadum I did the very same flight from London City to Heathrow and got the same deserted Heathrow on arrival. I did it a couple of times trying to work out what was wrong and fix it, I failed miserably to fix it. This was on the new updated installer too. ironically the old one worked fine, this fixing one broke it for me.
Its infuriating that there are so many issues with this release. People just want it to work as it should, simply, easily............just work -
Asking out of curiosity. For those of you who have issues with no traffic; are you using JF Traffic’s timetables, or are you using MSFS Live Traffic, but with the JFTraffic AI aircraft models? I’m curious to know if there are still no traffic issues when using MS Live Traffic over JF timetables.
-
Same problem since day one; The update didn't change anything (and I think it was not supposed to do it).
Back to FSLTL! -
@cadum
Just did a flight from KIAD to KDCA, less than 50 mile trip.No traffic when I arrived at KDCA...made sure to set the destination airport while in flight.
So....as of this moment, the best I can say...is that arrival traffic works maybe sometimes, maybe dependent on arrival airport.
I have used in this last flight two busy airports for the current time of day and day of the week....so I have no clue why this can't consistantly work as intended.
