Loading the TBM 850 closes MSFS 2020.
-
I have spent a significant amount of time using the debugger to look through Working Title's GNS code to find the source of this behavior with the enter button on startup. It only happens when an aircraft has two GNS 530 units installed, which has led me to believe that it has something to do with loading event ID's when the simulation first loads. Unfortunately, that code is a little beyond my skill level to understand, and I would also not be able to distribute a fix easily if I created one.
I have never seen the behavior on shutdown that you are describing, nor have we seen it reported by anyone else. I would make the same suggestion as above to temporarily empty your Community Folder to see if this makes any difference. If not, please let me know, and we can brainstorm some more things to try on your system.
-
@Black-Square Do you also get this behaviour with the enter button in the '24 version of the GNS?
-
Hi, thank you for the quick response, it is very much appreciated.
@Black-Square So for me it’s a clean installation of msfs and windows.
Before this the only aircraft installed was the SWS PC 12. Which works flawlessly and I removed it before the installation of the tbm 850. The community folder only has the tbm. This is not when two GNS 530 is installed, it’s with the default config with one GTN (which remains blank, because I do not use one) and one GNS 530. I checked event viewer and the win code is CoherentGTCore.dll. But I’m able to do full flights with no mid flight crashes.@GunStrauss what do mean by ‘24 version of GNS, I did not download any avionics
-
@GunStrauss what do mean by ‘24 version of GNS, I did not download any avionics
It was just a question for the developer.
-
I'm having the same issue since the last v1.2 update. Three out of four times loading into the sim with the TBM causes a CTD. The airport doesn't matter, runway or ramp, same result. Like the OP it happens a few consecutive times and then succeeds.
With the PMS GTN installed I get crashes when exiting the sim. With the 530 activated, I'm unable to load into the sim 50-75% of the time. I've been flying the TBM for a couple of releases and it's my favorite GA ac but the constant CTDs make it frustrating to attempt.
Same dll error, CoherentGTCore.dll
-
@n6478p Sorry to hear about that. I was about to write some suggestions, but unfortunately, it seems that I have already given my suggestions in the second post in this topic. There must not be many users with this problem at the present time, because I haven't heard about it from the Just Flight tech support team. If you can't get anywhere by trying what I suggested in this topic, it might be worth creating a ticket with them. They have a knowledgebase for solving issues like this that goes beyond my expertise creating the aircraft.
-
I had the same problem.
Was caused by a freeware airport addition.
Removed the airport and all fine. -
That's.....odd to say the least. Which airport/creator?
And to anyone else having this issue, do you use Navigraph data? Having the PMS GTN in my Community folder is pretty clearly introducing some instabilities, I wonder if it's nav data related.
To BSQ - Thanks, I will try creating a ticket. The challenge sometimes is that "putting things back into your community folder one at a time" is sometimes too tedious to be viable when the CTD is transient. I generally find troubleshooting myself and crowdsourcing with the forums to be more fruitful but will give it shot!
-
I have this problem only when I load the aircraft on the runway. Always CTD.
When I load into a parking position, everything is fine.
I have the TDS-GNX and the PMS50. The aircraft reverts always to the TDS, even if I set the PMS50 in the tablet. So there is something strange going on, perhaps also related to the CTD.