BARON ignition and pitot LVAR
-
I thought I understood the principle of LVARs but I didn't. At least not completely.
I have two problems.
The first one: I know how to go from OFF to L then R and BOTH but I can't get to START. LVAR:BKSQ_IGNITIONPOSITION_1 to 4 does not work.
The second one is for the L and R pitot heaters. I can't find the corresponding LVAR. When I try LVAR:DEICE_PITOT_1 to 1 AND CIRCUIT SWITCH ON:29 to 1, nothing happens.
I hope you will be able to help me, in any case thank you in advance.Eric
-
No more problems with the rotary switch of the pro switch panel. I found the solution.
Now I want to do the same thing with two rotary switches (one for each motor) connected to a BBI-32. I know how to emulate the rotary switch of the switch panel but I don't know if this is the right solution. It doesn't work.
I'm still looking. -
Hello
I found the solution to use a rotary switch to replace the switch panel.
Position 0 of the rotary switch :
Position 1 :
......and so on until position 3.
Position 4 (START) :
before going to position 4, I put the power at 0, I engage the start, then I put the power back. I come back to position 3 when the engine is started.
