BAe 146 Professional P3D v5 FMS/AP Issues
-
@ConcordeAG said in BAe 146 Professional P3D v5 FMS/AP Issues:
For me, the LOC/GS capture is still totally messed up and not usable in IMC conditions. Had to use the hdg bug and manually go down. Since the F/D also wants to turn away from the LOC, it wasn't usable either.
I'm still unable to reproduce that here. The AP/FD always intercept and then track the localiser/glideslope and never turn away from the localiser. Can you get in touch with the support team about that one so we can investigate further and try to reproduce then fix it?
@Martyn already did that.
-
@Martyn here the screenshots i just attached to the ticket - The small yellow diamond which stays at 000 - that's what it tries to intercept.
for VOR it works, not so much on the ILS.
Just tried to hookup NAV 2 - with that it works a bit, not as it should, but it intercepts and follows the general direction... Not with NAV 1
Intercept:
Turns away:
Chases the diamond:
-
-
LFSB, ILS15
@ConcordeAG said in BAe 146 Professional P3D v5 FMS/AP Issues:
LFSB
Are you using addon scenery such as JUSTSIM - EUROAIRPORT BASEL MULHOUSE FREIBURG?
-
FSDT in my case - but i have the same everywhere else too
So far:
- ORBX EGNX
- ORBX EGNT
- ORBX EGHI
- Aerosoft EDDK
- Gaya LOWW
- Digital Design EDDP
- FSDT LFSB
- ....
Basically everywhere the same.
-
FSDT in my case - but i have the same everywhere else too
So far:
- ORBX EGNX
- ORBX EGNT
- ORBX EGHI
- Aerosoft EDDK
- Gaya LOWW
- Digital Design EDDP
- FSDT LFSB
- ....
Basically everywhere the same.
-
Re the FMS issue I’ve managed to remove all trace of the aircraft form my computer via a registry edit, clean install of 1.3 with new activation...still no power or click spots on the FMS
how do I get a refund? -
Main problems I have so far are (some are the same as above)
The DTO doesn't go direct, this is a big problem especially when flying online.
The LOC capture always overshoots.
No STAR's for certain airports ( Hope this will be resolved with the new AIRAC).
SID selection problem (only first 2 selectable).
Weights are only in LBS. It's a British built plane, I expected it to be KG's.
The Clock face is incorrect ( goes from 22 to 22 instead of 22 to 23 ).
IAS doesn't hold the speed for the climb.
FO IAS does not function.
I am getting some weird coloured lights on the cockpit window at night (might be a p3dv5 problem).
FMC Pref page does not read the GS when flying so I get no ETA.
Trim on the aircraft doesn't work correctly at the moment. -
@Martyn already did that.
same issues reported by a few more, including myself. Aerosofts CRJ suffers from the same issue, it appears if you use default P3D code to capture the G/S LOC it can be unreliable. I believe the CRJ is getting a custom coded ILS system to overcome this.
-
same issues reported by a few more, including myself. Aerosofts CRJ suffers from the same issue, it appears if you use default P3D code to capture the G/S LOC it can be unreliable. I believe the CRJ is getting a custom coded ILS system to overcome this.
@PVJ can't confirm such behaviour by the AS CRJ. Doesn't deviate and capture a diamond at 000.
-
Re the FMS issue I’ve managed to remove all trace of the aircraft form my computer via a registry edit, clean install of 1.3 with new activation...still no power or click spots on the FMS
how do I get a refund?@IanB2469 said in BAe 146 Professional P3D v5 FMS/AP Issues:
Re the FMS issue I’ve managed to remove all trace of the aircraft form my computer via a registry edit, clean install of 1.3 with new activation...still no power or click spots on the FMS
how do I get a refund?Refunds and technical support are handled via our support team - https://support.justflight.com/en/support/tickets/new
-
@IanB2469 said in BAe 146 Professional P3D v5 FMS/AP Issues:
I've not been able to even do the tutorial flight, really disappointed.
What is preventing you from flying the tutorial? It doesn't use the FMC so presumably you are encountering another issue? There should be nothing in any of the 146 software versions that prevent the tutorial from being flown as it was written using v1.0.
-
To those customers that are having issues, please could you submit a ticket so that we can send extra files for you to test.
https://support.justflight.com/en/support/tickets/new
-
@Craig I made like 4 tickets for the various issues I encountered.
@ConcordeAG Do you have ticket number for me to take a look at?
-
@ConcordeAG Do you have ticket number for me to take a look at?
@Craig Absolutely,
- 46617: LLZ/GS (AP Issue)
- 46618: FMC Issue with the DTOs
- 46620: Something I observed with the TMS
- 46621: Sounds
-
To those customers that are having issues, please could you submit a ticket so that we can send extra files for you to test.
https://support.justflight.com/en/support/tickets/new
