How do I tune Nav2 on the PMS GTN 750

[lolander]

For some reason I can’t seem to access the nav2 radio on the pms750. I seem to recall pressing the bottom right tuning button in would let you toggle between nav1 & 2. That’s not working here. I have the paid version of the pms 750 installed and activated with the 650 selected as secondary.

[Black Square]

Pushing the center knob should swap between modifying COM1 and NAV1 on the GTN 750. If there is some other mechanism to modify the frequencies normally displayed on the GTN 650, then I am not familiar with it.

[MiRexer]

Nav 2 is on the 650 - you can't switch between nav1/2 on the 750. Like Nick said pushing the button switches between com and nav on each unit.

[Zacke]

Pressing the upper left button changes between NAV1/2 & COM1/2 on the P750.

[MiRexer]

Looks like it's an option (not sure the default - I may have changed it and that's why it wasn't working for me) - it's in System->Setup->Options->Allow Com/Nav switch - that has to be enabled for the upper left button to work as Zacke said above.

[lolander]

Mystery solved, I didn't realize you can't get Nav2 on the 750. Thanks guys.

[RealPax]

I was able to switch by pushing (right mouse button) the knob on the lower right corner of the 650. I do not recall that I did change anything inside the settings.
Maybe worth trying if the Solution provided by @MiRexer does not work for any reason.

[lolander]

Yup, that works for the 650, but not for the 750 which was what was confusing me.