Propeller feather binding?
-
I can't seem to get the correct FEATHER binding in MSFS2020. Although I originally had it working, I discovered it feathered both engines simultaneously, even though only one required feathering. Can you please advise the correct 'title' in the binding list to independently feather my turbine engines (I'm using the Honeycomb Bravo Throttle quadrant). Thanks, John.
-
Refer to this thread, a few threads down the list from this one.
https://community.justflight.com/topic/6393/can-you-feather-props-with-a-hardware-axis-or-button/12
-
Thanks, I ended up achieving this by coding the HCB via Mobiflight:
-4096 (>K PROP_PITCH1_SET) and -4096 (>K PROP_PITCH2_SET)
... and make sure you delete any other feather bindings in MSFS you may have previously had.
Once I pass either prop. lever through detent it selects full feather on that prop., but I assume there is not a graduation possibility in any case. I have checked the movement and each prop. RPM operates independently into feather as above.I have a question though, if I leave the prop levers at full fine, and shut the engines down, the blades appear to be in full feather when they stop (despite not moving the prop . levers at all) ... is this correct?