V.1.0.3 Released
-
@cscurlock
that's not the point. With 1.0.3 version it was supposed to fix problems of previous versions which didn't happen.So we are still at starting point with a product that doesn't deliver what it is supposed to do.
-
@elpix said in V.1.0.3 Released:
e movements on the ground but no takeoff/landing before deboarding. So it seems movement of AI aircrafts at arrival airport starts too late
I would recommend changing your ground services to fast turn around. With MSFS we can only spawn in and activate an aircraft at a certain distance from the airport. With that setting I often see traffic taxiing out to the runway whilst I'm landing.
-
@sebastiano148 What problems haven't been fixed that you were expecting to see with 1.0.3?
John - Just Flight.
Departure timetable from FS traffic control center doesn't match with departures of traffic injected into the sim.
1 over 2 or over 3 of injected traffic really departs compared to FS traffic control center. This ratio is even lower at arrival airportIn many departure airports where previous to latest release there was arriving traffic now there is zero arriving traffic. I've been staying spotting for more than 1 hour with zero arrival traffic. I'm talking about for example LIME - Bergamo, but also many other airports
-
Departure timetable from FS traffic control center doesn't match with departures of traffic injected into the sim.
1 over 2 or over 3 of injected traffic really departs compared to FS traffic control center. This ratio is even lower at arrival airportIn many departure airports where previous to latest release there was arriving traffic now there is zero arriving traffic. I've been staying spotting for more than 1 hour with zero arrival traffic. I'm talking about for example LIME - Bergamo, but also many other airports
@sebastiano148 said in V.1.0.3 Released:
In many departure airports where previous to latest release there was arriving traffic now there is zero arriving traffic. I've been staying spotting for more than 1 hour with zero arrival traffic. I'm talking about for example LIME - Bergamo, but also many other airports
I've just checked this out for you and it seems the default LIME has an issue with the ground services not pushing back all active aircraft. According to Asobo's SU12 beta release notes this issue is fixed. I wouldn't recommend updating to SU12 yet though.
One thing you can try is turning off all ground services and see if pushbacks are more consistent.
We will look into arrivals for you. During testing we found them to be much more consistent but we obviously didn't have chance to test every airport.
John - Just Flight.
-
@sebastiano148 said in V.1.0.3 Released:
In many departure airports where previous to latest release there was arriving traffic now there is zero arriving traffic. I've been staying spotting for more than 1 hour with zero arrival traffic. I'm talking about for example LIME - Bergamo, but also many other airports
I've just checked this out for you and it seems the default LIME has an issue with the ground services not pushing back all active aircraft. According to Asobo's SU12 beta release notes this issue is fixed. I wouldn't recommend updating to SU12 yet though.
One thing you can try is turning off all ground services and see if pushbacks are more consistent.
We will look into arrivals for you. During testing we found them to be much more consistent but we obviously didn't have chance to test every airport.
John - Just Flight.
-
@sebastiano148 said in V.1.0.3 Released:
In many departure airports where previous to latest release there was arriving traffic now there is zero arriving traffic. I've been staying spotting for more than 1 hour with zero arrival traffic. I'm talking about for example LIME - Bergamo, but also many other airports
I've just checked this out for you and it seems the default LIME has an issue with the ground services not pushing back all active aircraft. According to Asobo's SU12 beta release notes this issue is fixed. I wouldn't recommend updating to SU12 yet though.
One thing you can try is turning off all ground services and see if pushbacks are more consistent.
We will look into arrivals for you. During testing we found them to be much more consistent but we obviously didn't have chance to test every airport.
John - Just Flight.
@jf-john
Thank you for your reply. Please note that I'm not using default LIME but tailstrike design.
Anyway the main issue is zero arrivals.
Regarding the departures those are random also in other airports I've tried, such as LFPO, LIMC... -
@sebastiano148 said in V.1.0.3 Released:
In many departure airports where previous to latest release there was arriving traffic now there is zero arriving traffic. I've been staying spotting for more than 1 hour with zero arrival traffic. I'm talking about for example LIME - Bergamo, but also many other airports
I've just checked this out for you and it seems the default LIME has an issue with the ground services not pushing back all active aircraft. According to Asobo's SU12 beta release notes this issue is fixed. I wouldn't recommend updating to SU12 yet though.
One thing you can try is turning off all ground services and see if pushbacks are more consistent.
We will look into arrivals for you. During testing we found them to be much more consistent but we obviously didn't have chance to test every airport.
John - Just Flight.
-
@elpix said in V.1.0.3 Released:
e movements on the ground but no takeoff/landing before deboarding. So it seems movement of AI aircrafts at arrival airport starts too late
I would recommend changing your ground services to fast turn around. With MSFS we can only spawn in and activate an aircraft at a certain distance from the airport. With that setting I often see traffic taxiing out to the runway whilst I'm landing.
-
@sclrkuk
In the FS Traffic Control Center, Aircraft Manager page and then Ground Services subpage -
This is just more difficult than it should be to get going now. At EGLL I have about 10 aircraft parked up,10! That's pathetic for a major airport. Far from an improvements its worse that it was before. I dont mind saying I am pretty disappointed about the amount of jumping through hoops I have had to do to get it working like the previous version did. On top of that the installer for the actual planes managed to create a folder and put precisely nothing in it after telling me it had successfully installed the models. That caused an error and the traffic control centre issue reported in my ticket.
Apart from the above the problem is that your system default to settings that minimise airport traffic from the outset. It should install with the Aircraft manager set to the default settings but it doesn't, it sets it to some peculiar values instead which makes things look far worse than default settings in the previous version setup.. So I had to mess around for some time trying to find out why we are seeing few if any planes at really large airports.
-
This is just more difficult than it should be to get going now. At EGLL I have about 10 aircraft parked up,10! That's pathetic for a major airport. Far from an improvements its worse that it was before. I dont mind saying I am pretty disappointed about the amount of jumping through hoops I have had to do to get it working like the previous version did. On top of that the installer for the actual planes managed to create a folder and put precisely nothing in it after telling me it had successfully installed the models. That caused an error and the traffic control centre issue reported in my ticket.
Apart from the above the problem is that your system default to settings that minimise airport traffic from the outset. It should install with the Aircraft manager set to the default settings but it doesn't, it sets it to some peculiar values instead which makes things look far worse than default settings in the previous version setup.. So I had to mess around for some time trying to find out why we are seeing few if any planes at really large airports.
Ten? Not sure what you’ve got your settings on, but at EGLL yesterday, the airport was heaving with aircraft for me.
-
@sebastian148
My observations at LIML at 6.30pm (scenery by Jetstream):- aircraft departed after 5 minutes
- first final approach after 12 minutes, second after 24 minutes
@cbcdesign
My observations at EGLL at 2.30pm (scenery by iniBuilds):I have stopped counting after I regognized 35 aircraft. ;)
Patric
-
@sebastian148
My observations at LIML at 6.30pm (scenery by Jetstream):- aircraft departed after 5 minutes
- first final approach after 12 minutes, second after 24 minutes
@cbcdesign
My observations at EGLL at 2.30pm (scenery by iniBuilds):I have stopped counting after I regognized 35 aircraft. ;)
Patric
@pscharff Its very odd. I had just 10 aircraft at EGLL, I counted them. I then opened the control centre and clicked the default setting in the ground services menu which ticked a whole load of options that were previously blank, left the sim, re-started and now have a lot more than that. It seemed to default after installation to a set up that put very few aircraft on the ground until I re-set the ground services settings.
-
Hello everyone.
1.0.3 is now available. You'll need to reinstall both the core and fleet packages as both have been updated.
Keep track of the changelogs here: https://community.justflight.com/topic/4240/update-change-logs-v1-0-3-released-edited-01-03-2023
Looking forward to your feedback.
John - Just Flight.
@jf-john I have tried the new version for 6 different flights, mainly in Europe, and I must say it is now a very convincing addon. I find it very useful since I live in north America and fly mainly in Europe, so the use of timetables is really appreciated, unlike other addons Ive tried. And the last fixes make it work pretty well for me. I am looking forward to see how it will work with the new AI mechanics of SU12. Thanks
-
@sebastian148
My observations at LIML at 6.30pm (scenery by Jetstream):- aircraft departed after 5 minutes
- first final approach after 12 minutes, second after 24 minutes
@cbcdesign
My observations at EGLL at 2.30pm (scenery by iniBuilds):I have stopped counting after I regognized 35 aircraft. ;)
Patric
-
@pscharff
So which could be the reason why I don't see arriving traffic?@sebastiano148 I had that problem. I uninstalled FS-Traffic via settings/apps. I then deleted the remaining FS-Traffic folders from the Community folder and did a new install. It all worked fine after that.
-
@jf-john
Just tried also LIML. Zero arrivals over more than 50 minutes spotting. In previous 1.0.2 version there was arriving traffic in LIML@sebastiano148 Hello again.
I've checked out the default LIML and LIME and arrival traffic spawned at both.
Do you use Little Nav Map at all? This can help get a clearer picture of what's going on. Depending on the airport, landing traffic can take a while to join the approach, but that's down to how the sim handles the AI.Another reason you might not see AI landing at the airport is if there's a scenery issue that causing AI to despawn before landing.
John - Just Flight.
-
@sebastiano148 Hello again.
I've checked out the default LIML and LIME and arrival traffic spawned at both.
Do you use Little Nav Map at all? This can help get a clearer picture of what's going on. Depending on the airport, landing traffic can take a while to join the approach, but that's down to how the sim handles the AI.Another reason you might not see AI landing at the airport is if there's a scenery issue that causing AI to despawn before landing.
John - Just Flight.
@jf-john
I tried to uninstall and reinstall Fs Traffic. At first run I had arriving traffic, then I closed the sim, restarted the PC and the sim. And again no arriving traffic at LIML.I use Little Navmap to monitor it. The only thing I changed in the 2 tests is that on the first one (when I had arriving traffic after uninstall and reinstall) I run the FS traffic Control Center after seeing the first arriving traffic in Little Navmap, on the second one (when I had no arriving traffic again) is that I run the FS traffic Control Center immediately after starting the sim (when the flight was loaded at the airport).
Last change is that I changed from default to Fast Gate Turnarounds in Ground Services.
-
OK, here are my two-cents with the last FS Traffic update
- Uninstalled everything from earlier version (including the .EXE files), and installed again. No problem.
- I use add-on linker, so I moved to folders to my add-on repository, and created link. No problem.
- Tried yesterday one first flight, LIPE-LEBL:
- On departure, a couple of planes parked, no moving traffic. LIPE (Bologna) is a small airport, so this is possible.
-
During cruise, encountered a few planes, visible by their contrails; not too many, but ok; pity they do not interact with ATC (FSTL injected planes do talk with ATC on cruise, so that must be possible).
-
Upon landing at LEBL there were planes at the gates, and some taxiing for departure. After a while, planes started to arrive, with a >80% go-around rate, followed by the famous Maverick-style low fly-by of the airport.****
-
Another flight today, LEBL to LFLL:
-
Spawned at the gate, there were other planes around they started to move for departure. So far so good. After a while, traffic started to arrive, in a chaotic way, with not a single plane (that I saw) actually landing. Only go-arounds and low altitude fly-bys. Upon taxing, I realized that the TCAS in the ND was showing dozens of planes near me (at a given moment, I counted 25 planes). Of course, FPS were hit by so many planes around. After taking off from 24L, the TCAS showed a swarm of planes flying against me (which makes no sense, as I was on the SID). A bit later I saw them: 10 – 12 planes, all flying “against me” (albeit at lower altitude) and the distance between them was just a few hundred meters; I sill wonder if those planes were going to land (they were flying the SID counter-direction, so that makes no sense) or they belong to the kingdom of lost-go-around-planes and were just doing crazy stuff. Anyway, a total mess.
-
During cruise a few flights, shown in the TCAS and by the contrails. Some of them seemed to talk to ATC.
-
Upon arrival, there was no other plane around the airport (according to the TCAS). After taxiing, I found some gates occupied by planes (probably a bit too few), then two planes landed successfully and taxied to gate, and finally a parked plane started moving, taxied and took off. During the time I was there, probably a bit too low traffic load, but everything seemed normal.
In conclusion:
- The lack of planes upon arrival seems solved. But the traffic created by MS Traffic seems very unreliable (sometimes too little, sometimes too much), and their behavior can be terrible (especially with so many go-arounds). There should be a way in the injector to automatically de-spawn planes flying too close to another aircraft, or after a go-around.
- So, for the time being, I leave FS traffic injector in the fridge, and will keep using FSTL with FS traffic models, which gives me the same frame rates and is much much more consistent and reliable with AI traffic performance. I hope FS traffic can eventually be improved (hopefully after SU12), because I would like to have a good and reliable alternative to real-traffic FSTL for when I fly in another continent during times when there is no live traffic around.
Apologies for the long post
