Callouts not respecting TRP speeds
RJ Professional
2
Posts
2
Posters
266
Views
1
Watching
-
I had used a lower V1 speed and entered it into the TRP. I noticed, that the GO callout by the PM was still made at the original speed. I also tried changing VFTO and I again noticed, that the callout to retract the flaps was made at the original speed, not at the speed entered in the TRP.
I would have expected the speeds in the TRP to take precedence if they are entered. -
This is intentional logic as the callouts are based on the speed flipchart on the main instrument panel, which if the FLIPCHART WT SYNC is enabled on the EFB, will always provide the correct speeds for the aircraft's current weight. The speed flipchart doesn't include V1 speeds, so we assume V1=VR as recommended in the FCOMs.
Mark - Just Flight
