TRP master push button not illuminating, as described in manual
-
Hi,
On a few flights that I tried, some of them included starting from cold and dark and some of them starting from runway start with all things started. In both cases, I could not manage to get the TRP master push button to illuminate. From the manual, it looks like there should be some illumination to indicate either eng 1 or eng 2 is set as master.
Other TRP buttons seems to work and illuminate properly.
Any one else seeing this?
-
The MSTR 1/2 button and annunciators will only become active if the autothrottle is disengaged and CLIMB MAX or CLIMB MIN is selected on the TRP.
More in-depth info on each of the TRP modes can be found on page 86 of the RJ Operations Manual.
Mark - Just Flight
-
The MSTR 1/2 button and annunciators will only become active if the autothrottle is disengaged and CLIMB MAX or CLIMB MIN is selected on the TRP.
More in-depth info on each of the TRP modes can be found on page 86 of the RJ Operations Manual.
Mark - Just Flight
