No Traffic
-
@anacrusis Yes, sorry. I should have clarified that. This is where it is for the MS Store version.
@mookie2661 Thanks for the update
-
@dude said in No Traffic:
Emptied my Community and restarted MSFS which did not made things better.
However, forgot to remove GSX Pro from Community and after I removed GSX Pro, planes started to pop up. However, I have not seen any planes push back or taxi, but at least I do see other planes now which was not the case when GSX Pro was still in my Community folder..I suspect that GSX Pro could be a possible reason for the problem. I own it too. At the moment this tool is not installed on my system, and I can see traffic.
You need to wait at least 10 minutes to see traffic moving.
Patric
-
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
-
@pscharff I tried unlinking it and did not see a change..if this interferes with GSX, I will definitely have an issue with that
-
Ok everyone. First of all, I'm on steam. But, this should work for everyone. GSX Pro ,in my case is the problem. Lower left hand corner of desktop screen hit start button, then scrol down to FsDreamteam.Click on it and hit , FSDT Installer. When the window pops up look for your GSX Pro. Just unlink link it. It will become invisible within community folder without uninstalling it. Worked for me. Give it a try.
-
Ok everyone. First of all, I'm on steam. But, this should work for everyone. GSX Pro ,in my case is the problem. Lower left hand corner of desktop screen hit start button, then scrol down to FsDreamteam.Click on it and hit , FSDT Installer. When the window pops up look for your GSX Pro. Just unlink link it. It will become invisible within community folder without uninstalling it. Worked for me. Give it a try.
-
Ok everyone. First of all, I'm on steam. But, this should work for everyone. GSX Pro ,in my case is the problem. Lower left hand corner of desktop screen hit start button, then scrol down to FsDreamteam.Click on it and hit , FSDT Installer. When the window pops up look for your GSX Pro. Just unlink link it. It will become invisible within community folder without uninstalling it. Worked for me. Give it a try.
-
Followed instructions. Installed program, entered ICAO code when I spawn in, but when I hit confirm, no planes show up at all. I have tried reinstalling the program and restarting the computer and simulator multiple times. Would be nice to be able to use this program as this is my only day off for 18 days
-
Same here, no traffic, I have tried everything! Uninstalled, installed, opened as administrator, cleared MSFS cache, followed all recommendations and solutions proposed above, not to mention the software errors in the "traffic control center." I have of course opened a ticket with support to request the repair of the addon so that it works and we can use our purchase, or a refund if it is unusable!
ticket: #69607
-
I have GSX Pro and I have found then when I spawn on the runway I have traffic, when I spawn at the gate/parking I don't have traffic.
At the moment my work around is to spawn on the runway then use GSX Pro to then warp me to an available gate/parking and the traffic still remains. :man_shrugging_medium_skin_tone:Also FS Traffic clashes with Flight Control Replay, causing CTD. I had to remove 'flightcontrolreplay-ingamepanels-custom'' from the community folder, then it loaded with no traffic, then realised GSX Pro was the next problem
-
Same here, no traffic, I have tried everything! Uninstalled, installed, opened as administrator, cleared MSFS cache, followed all recommendations and solutions proposed above, not to mention the software errors in the "traffic control center." I have of course opened a ticket with support to request the repair of the addon so that it works and we can use our purchase, or a refund if it is unusable!
ticket: #69607
-
@qazme said in No Traffic:
@pscharff I had the same issue. If you go into the control center and turn ground services off for your FS traffic it will fix the issues with GSX. This was covered either in the manual or the getting started video or both.
Thanks for the information. I must have overlooked this option.
Patric
-
Followed instructions. Installed program, entered ICAO code when I spawn in, but when I hit confirm, no planes show up at all. I have tried reinstalling the program and restarting the computer and simulator multiple times. Would be nice to be able to use this program as this is my only day off for 18 days
I was hoping for a set it and forget it type of sw. But this is obviously not it. With the endless number of developers that think they are the only one making third party add-ons for the community, we're left tweaking more than actually enjoying the simulator. I am so tired being a beta tester for various developers that can’t wait to take our money. Especially at this price level. Why can't we just get something that runs out of the box. I really don't care about routes, and all those extra things. I just want to see airport life with good AI models.
I am also fed up with developers blaming other developers, limits within the sim and other lame excuses. I really don't care! That is not my problem. Do it 100% or let it be! I am done altering and reworking things that should just work. I don’t care if it is early in the release process. I am a paying customer. -
I was hoping for a set it and forget it type of sw. But this is obviously not it. With the endless number of developers that think they are the only one making third party add-ons for the community, we're left tweaking more than actually enjoying the simulator. I am so tired being a beta tester for various developers that can’t wait to take our money. Especially at this price level. Why can't we just get something that runs out of the box. I really don't care about routes, and all those extra things. I just want to see airport life with good AI models.
I am also fed up with developers blaming other developers, limits within the sim and other lame excuses. I really don't care! That is not my problem. Do it 100% or let it be! I am done altering and reworking things that should just work. I don’t care if it is early in the release process. I am a paying customer.Unfortunately the sw is not working for me. I use GSX Pro and I tried all possible setup what we can read in manual and here in forum.
I t is not good, that it is not working with GSX Pro and sorry, but I can't accept the answer, that MSFS has an object loading limitation. It's a bullshit. FSLTL solved it. -
I was hoping for a set it and forget it type of sw. But this is obviously not it. With the endless number of developers that think they are the only one making third party add-ons for the community, we're left tweaking more than actually enjoying the simulator. I am so tired being a beta tester for various developers that can’t wait to take our money. Especially at this price level. Why can't we just get something that runs out of the box. I really don't care about routes, and all those extra things. I just want to see airport life with good AI models.
I am also fed up with developers blaming other developers, limits within the sim and other lame excuses. I really don't care! That is not my problem. Do it 100% or let it be! I am done altering and reworking things that should just work. I don’t care if it is early in the release process. I am a paying customer.@myndighetene I got it to work once or twice, but only with no ground services, jetways, vehicles, or workers. I don't think any of us are willing to sacrifice things like this ontop of GSX Pro when FSLTL can run everything without issue, free of charge. I personally requested a refund if I can't use this program
-
@myndighetene I got it to work once or twice, but only with no ground services, jetways, vehicles, or workers. I don't think any of us are willing to sacrifice things like this ontop of GSX Pro when FSLTL can run everything without issue, free of charge. I personally requested a refund if I can't use this program
@777dave
I want to refund as well! Where can u start it?
Mail or website? -
@777dave
I want to refund as well! Where can u start it?
Mail or website?@hedgehog9780 You need to head to support and lodge a ticket to start that process.
https://support.justflight.com/support/solutions/folders/17000141794
-
Ok after changing my ground services to off and following a sim restart I now have what looks like an air show going on. Planes all over the place, stacking up at the intersections of taxi ways, low passes over the terminals, leaping from the ground like fighter jets etc.
On pushback they didn't disappear this time - so it looks like it's the draw limit thing collapsing the plugin if you leave ground services on - at least for me right now.
*Edit - planes are persisting now. In flight TCAS has the traffic. Seems ok besides the weird behavior. Almost how FSLTL behaved almost a year ago. This has a long way to go to be right. Performance seems decent which is the only thing going for it atm if you get it working.
@qazme I was also able to get it to work by disabling ground services. Problem is, by doing this, the planes literally just sit at the gate now. No jetways, no baggae, nothing. Makes an extremely non immsersive enviroment.
I also tried uninstalling GSX and FSRealistic, as I heard these were common conflicting programs and was unsuccessful.
-
I have tried several airports and my result is no problem at all in Europe like Norway, Sweden, germany, Austria, UK London Heathrow it work perfect. Traffic departing and arriving aircrafts.
But when I switch to US KATL, or KLAX not one Aircraft is at the airport. JFK is full of aircrafts.
My thinking is that some payware airports are the problem and cant work together with Traffic
