Quality of life features
-
1 - VHF1 set to 122.800 automatically (Unicom), now it is 124.850
2 - VHF2 Set to 121.500 (Guard)
3 - Default squawk should be 2000, now it is 1234 - and in STBY
4 - Possible option via settings to allow screens to be switched on automatically upon power up. Now you need to use the brightness switch for each screen, this would be a nice additional feature.Thank you
-
Hi Rhys. Thanks for the suggestions.
Some of the configuration settings (e.g. logo lights) are automatically set based on the real world airline/operator configurations. That will essentially overwrite any changes that you've made during your flight.
-
Hi, thanks for the reply. That makes sense.
One more thing, I pressed the STD button (ALTM), by the DH knob, which obviously set it into STD. However, this didn’t change the pressure setting on the ALTM Set panel above the FMC. Is it meant to work like that? I have sync barometric pressure on via settings. Thank you!
-
1 - VHF1 set to 122.800 automatically (Unicom), now it is 124.850
2 - VHF2 Set to 121.500 (Guard)
3 - Default squawk should be 2000, now it is 1234 - and in STBY
4 - Possible option via settings to allow screens to be switched on automatically upon power up. Now you need to use the brightness switch for each screen, this would be a nice additional feature.Thank you
@Rhys These are all great ideas!
