Autopilot goes from VOR to ROLL when tracking VOR

09tir98

The autopilot will quite often go in to ROLL mode when flying in VOR mode. Sometimes it happens every few seconds and sometimes less often. This occurs even when the signal from the VOR is very strong, say within 30 miles of the VOR, and the needle is completely centered on the HSI.

Is this expected behavior even when the VOR signal is completely stable? I understand this should happen when the signal is unstable but it seems strange to me that it happens with a stable signal.

MarkS

I have had this too. I can’t swear to it, but it seems to happen more frequently since SU4 (MSFS 2024). If nothing else, it keeps you on your toes.

https://community.justflight.com/topic/10041/repeated-nav-mode-disconnects-while-vfr-hopping

Black Square

I've yet to see this happen myself, but I will be on the lookout for it. Autopilot disengagement due to loss of signal is entirely handled by the native autopilot controller, so I doubt there is much I can do, unfortunately.

MarkS

@Black-Square I know the real plane doesn’t have this feature but for purposes of trying to catch an uncommanded fallback from NAV to ROLL, an audible alert when it occurs would be useful. The autopilot disconnect sound, for instance, would certainly get my attention. Where would be an appropriate place to implement this pseudocode?

If CurrMode = ROLL and LastMode = NAV then
    PlaySound(AutopilotDisconnect)
LastMode = CurrMode

Black Square

@MarkS If you really want to open that can of worms for yourself, search for the following in Starship_Interior.XML

(&gt;L:var_AutopilotDisconnectTone, bool)

I'm happy to help with that. I just wanted to give you a quick answer before I left my desk for a few minutes.

Jouxeur33

actually idk if i'm missing something but sometimes when coming in an angle in HDG mode i cannot capture LOC signal, idk if its an autopilot limitation but i couldnt find something like that in the manual, also sometimes when coming via a FMS route to an IAF when i select appr mode it goes in FMS GS and i have to change nav source to finnaly capture LOC but in a case of vectoring im not sure to know how to fly an auto coupled approach from HDG mode to appr LOC GS.. but i'm sure im missing something here...

jmarkows

Are you running the latest version? There was a bug at launch that caused that.

Jouxeur33

oh i have 0.1.0 but latest is 0.1.2 u think that could be the cause?

EDIT : i've read the change log and there is something about it indeed so its on me thanks anyways!

MarkS

@Black-Square said in Autopilot goes from VOR to ROLL when tracking VOR:

I'm happy to help with that. I just wanted to give you a quick answer before I left my desk for a few minutes.

@Black-Square Nick, sorry, I know you're a busy guy, but I'm going to have to ask for some help with this. My first calculator was a slide rule way back last century, but this RPN stuff throws me once the nesting starts. I have to tease it out into a non-RPN form to try to get a handle on it, and even then I'm not sure I'm getting it right.

(In fact, I'm pretty sure I introduced an intermittent timing issue with my "personalization" mod, because I get spurious warning button activations from time to time, sometimes only transient, sometimes they cycle for a while. That's on me though, not asking for your help with that.)

To recap, what I am looking to do is to trigger the autopilot disconnect tone if the autopilot fails over from NAV to ROLL mode. And of course it should cease sounding if I press the autopilot disconnect button as usual.

If CurrMode = ROLL and LastMode = NAV then
    PlaySound(AutopilotDisconnect)
LastMode = CurrMode

The code itself likely isn't that hard, but I'm having trouble locating the relevent mode variables, and there's nested code in that whole Flight Director section that I can't quite get my head around, so I'm not sure where to safely put the code even if I had the vars on hand.

Black Square

@MarkS Give this a try I'm not sure exactly what this will do, but it should be a good place to start.

<UseTemplate Name="ASOBO_GT_Update">
	<FREQUENCY>1</FREQUENCY>
	<UPDATE_CODE>
		(A:AUTOPILOT MASTER, bool) (O:lastApNavMode) (A:AUTOPILOT BANK HOLD, Bool) (A:AUTOPILOT WING LEVELER, Bool) or and and if{
			1 (&gt;L:var_AutopilotDisconnectTone, bool)
		}
		(A:AUTOPILOT NAV1 LOCK, bool) (&gt;O:lastApNavMode)
	</UPDATE_CODE>
</UseTemplate>

MarkS

@Black-Square said in Autopilot goes from VOR to ROLL when tracking VOR:

@MarkS Give this a try I'm not sure exactly what this will do, but it should be a good place to start.

Thank you. Any particular location in the Flight Director code section you'd recommend to put it?

Black Square

You can drop that anywhere in the file between other <UseTemplate Name="ASOBO_GT_Update"> tags. For instance, right after the  comment.

MarkS

@Black-Square I'll give it a go. I suppose it could be dropped in anywhere but in good practice it ought to be at least near the other relevant functionality.

(P.S. as hard as it is for me to parse RPN, your code is a treat to work with for this old automation engineer).

MarkS

@Black-Square no joy.

According to an Axes and Ohs watch list I set up to monitor, it appears the O:lastApNavMode variable isn't getting updated,(what is an O variable anyway?), or perhaps Axes and Ohs isn't capable yet of seeing it. I can declare it in the watch list, and it appears, but that doesn't necessarily mean there's communication to it.

I did a test flight with two VORs and deliberately flew through their zone 'o' confusion to force a failover from NAV to ROLL. Which happened as expected, but no alarm.

In fact, the AUTOPILOT BANK HOLD and AUTOPILOT WING LEVELER are never '1' at any point in during flight testing, and I'm not sure if it's something I'm doing or not doing or its just one of those weird things that are out of our hands like state saving.

This tickles my old engineering brain a little and I'm tempted to take a crack at it. I'm wondering if I can just declare a var in the interior.xml that Axes and Ohs can (demonstrably) see, to replace the O var. Maybe Mr Occam had a nice shave and will smile kindly on my attempt.

Here's the sequence with the Axes and Ohs watch lists.

Black Square

O:Vars are local to the scope of that UseTemplate tag, but if you just replace the O with an L, that should make it globally visible.

Do I misunderstand your message, or is AUTOPILOT BANK HOLD true in your last screenshot, right when we expect it to be?

I don't see anything wrong with the code, but I can test it when I'm next working in the simulator. Can you show me where you inserted it into the file?

MarkS

@Black-Square said in Autopilot goes from VOR to ROLL when tracking VOR:

Do I misunderstand your message, or is AUTOPILOT BANK HOLD true in your last screenshot, right when we expect it to be?

No, that's on me, I missed that it was set. Nice catch. Interesting though, that Wing Leveler is never true.

I put the new code at the top of the Flight Director section (I was bold and already changed the O to an L but haven't had a chance to test it yet).

I sat with it for a bit afterwards and thought it might simplify to something like this (sorry for the infix pseudocode, can't "think" in RPN):

If
	A:AUTOPILOT_MASTER = True and L:lastApNavMode = True and A:AUTOPILOT_NAV1_LOCK = False
Then
	L:var_AutopilotDisconnectTone := 1
Endif
L:lastAPNavMode := A:AUTOPLOT_NAV1_LOCK

The RPN issue I have with the above is that the NAV1 LOCK comparator is (I think) an "and not" operation in RPN, and I don't know how to do that. I'm not entirely sure what BANK HOLD or WING LEVELER are bringing to the party, but you surely have a better handle on that than I.

MarkS

Against my better judgement, I came up with this refactoring of the infix pseudocode I proposed above:

<!-- Mark's Occam-Channeling Autopilot NAV to ROLL mode failover alarm (probably doesn't work) -->

<UseTemplate Name="ASOBO_GT_Update">
	<FREQUENCY>1</FREQUENCY>
	<UPDATE_CODE>
		(A:AUTOPILOT NAV1 LOCK, bool) (L:lastApNavMode) (A:AUTOPILOT MASTER, bool) not and and if {
			1 (&gt;L:var_AutopilotDisconnectTone, bool)
		}
		(A:AUTOPILOT NAV1 LOCK, bool) (&gt;L:lastApNavMode)
	</UPDATE_CODE>
</UseTemplate>

I looks almost right to my eye, but I still don't know if that 'and not' is legal. Guess I'll find out later. At least it's easy to remove if (when) it fails spectacularly.

Addendum: It didn't fail, but it didn't work either. @Black-Square shouldn't (L:lastApNavMode) be (L:lastApNavMode, bool) instead?

Black Square

The code was working, but the sound was only triggering once. Try this:

(L:var_AutopilotSource, bool) ! (L:var_ActiveNavSource_L, number) 2 &lt; and
(L:var_AutopilotSource, bool)   (L:var_ActiveNavSource_R, number) 2 &lt; and
or
(A:AUTOPILOT BANK HOLD, Bool) (A:AUTOPILOT WING LEVELER, Bool) or and
(A:AUTOPILOT MASTER, bool) and
if{
	(L:lastApNavMode, bool) if{
		1 (&gt;L:var_AutopilotDisconnectTone, bool)
	}
	els{
		0 (&gt;L:var_AutopilotDisconnectTone, bool)
	}
}
(A:AUTOPILOT NAV1 LOCK, bool) (&gt;L:lastApNavMode, bool)

I added some extra features for you while I was at it. It should only trigger when you're using VOR navigation now too.

Thanks for putting me back in Starship for just a couple minutes. What an absolutely magnificent machine.

MarkS

@Black-Square said in Autopilot goes from VOR to ROLL when tracking VOR:

Thanks for putting me back in Starship for just a couple minutes. What an absolutely magnificent machine.

Indeed it is, and I'll have more to say on that in another thread. But for openers...

YES! YES! Happy dance underway. It works! Gave me a bit of a scare, as I'd forgotten to update layout.json after editing the interior.xml, and the first time I loaded in, the cockpit had been eaten! After a brief moment of panic, I got that sorted.

A couple of quick tests near my local VOR (it's still weird to me flying Starship near my home), and we have a winner! Here's the test results:

NAV-ROLL Failover - Enhanced Version - Functional Test

Test environment:
Win 11, MSFS 2024
Departure: KRDG
Destination: KPHL
Intermediate VOR: PTW 116.50, CRS 126 deg, 21 nm from KRDG

Nav preset and pre-selected prior to departure.

Autopilot engaged, NAV in FMS mode, climbing to altitude (3500 AGL)

Autopilot engaged, NAV in FMS mode, ALT mode engaged

Autopilot engaged, NAV in VOR mode, tracking inbound to VOR, ALT mode engaged

Autopilot engaged, overflew VOR, failover to ROLL mode (cone 'o' confusion), ALT mode engaged.

The only change I would make, is to keep the disconnect alarm sounding until silenced by the pilot, just like a normal autopilot disconnect, rather than the one-shot alarm that's in there now. It is easy to miss, like the MDA alarm (at least for me).

Next step for me is to roll this into my "personalization" mod where I've changed a few things to better suit how I'd leave the plane if I actually owned one. (I would pay genuine cash money just for the opportunity to sit in the cockpit and preflight one of these for real.)

Although I've not experienced this in any of your other aircraft, this should be adaptable into the Caravan's interior.xml for those experiencing the issue there, would you agree?

FlightEngineer1

Hi,

While searching for solutions for switching from NAV to ROL on the MSFS KAP 140, I came across this thread.

I'm part of AVNX, and we develop touch panels for the air manager software. We created a free Cessna 152 and integrated a KAP 140 into the touch panel. We activated it via a mod by enabling the autopilot in the system.cfg file. The only problem is tracking a VOR in Nav mode. There, the autopilot occasionally switches from Nav (Nav Hold) to ROL (wing leveler).

To minimize this, I've adjusted the autopilot parameters several times in the system.cfg file. There, by entering values such as these, you can significantly influence the autopilot:

nav_proportional_control_ex1=10
nav_integrator_control_ex1=1
nav_derivative_control_ex1=5
nav_integrator_boundary_ex1=5
nav_derivative_boundary_ex1=10

It works quite well now. However, the autopilot still occasionally switches from NAV to ROL, though much less frequently than before.

Since the interactions of these parameters are not described in the SDK, I would be interested to hear if anyone has already found a solution. I am currently 51 NM at 2500 ft outbound from a VOR, and it has only switched once.