Warrior 0.4.0 Update Not Working in 2020
-
I installed the new update for 2020 but I'm having a whole host of issues. All of the gyro gauges appear off, all of the vacuum gauges are not moving (no airspeed, no altimeter). Fuel gauges show 0, oil pressure 0. Yokes move in and out when I move my hardware yoke but they are visually stick as if rotated full left. Tablet is dark and won't turn on, the paper charts (I'm assuming that's what I see to my lower left) won't open. A lot of switches don't move (but some of them do). The plane actually flies fine, the controls all seem to work, flaps work, throttle and mix work, parking brake works. Fuel pump works, mags work.... I tried uninstalling and reinstalling but that didn't help.
-
Shortly after the release of the recent PA28 updates, we were made aware of a WASM conflict with the Interactive Paper Charts that was affecting users that had a custom tail number set in the aircraft menu (identification tab). This would cause symptoms in the aircraft similar to what is described above.
We have since released updated installers, which can be downloaded via your account (the updated installer filenames end in 'a').
For the time being, we have disabled Interactive Paper Charts until we've implemented a permanent fix. That should happen on Monday.
Apologies for the inconvenience.
Mark - Just Flight
-
I installed the new update for 2020 but I'm having a whole host of issues. All of the gyro gauges appear off, all of the vacuum gauges are not moving (no airspeed, no altimeter). Fuel gauges show 0, oil pressure 0. Yokes move in and out when I move my hardware yoke but they are visually stick as if rotated full left. Tablet is dark and won't turn on, the paper charts (I'm assuming that's what I see to my lower left) won't open. A lot of switches don't move (but some of them do). The plane actually flies fine, the controls all seem to work, flaps work, throttle and mix work, parking brake works. Fuel pump works, mags work.... I tried uninstalling and reinstalling but that didn't help.
@PiperFlyer I'm having the same issue with the new update. None of the avionics in the plane will turn on. I've toggled every switch in the cabin. Also both yokes are stuck full left. I expect a fix will be coming soon from Justflight.
-
Hi all,
We have just released updates to each of our PA28s, which should fix the issues raised in this thread. The updates can be downloaded via your Just Flight account.
Arrow III (v0.11.1) changelog: https://community.justflight.com/topic/1806/update-changelogs-v0-11-1-released-edited-13-05-25
Turbo Arrow III/IV (v0.6.1) changelog: https://community.justflight.com/topic/2257/update-changelogs-v0-6-1-released-edited-13-05-25
Warrior II (v0.4.1) changelog: https://community.justflight.com/topic/2476/update-changelogs-v0-4-1-released-edited-13-05-25Mark - Just Flight
