Nav Radios/ILS
-
Hi All,
Anyone finding that the Nav radios stop working during flight. When I start a flight and there is a VOR close by they will tune OK. If I don't update VOR's during the flight I find they will stop working. Also when this happens it will not pick up any ILS signal that is tuned. I am flying the RJ in FS2024.Any help appreciated
Roger
-
If they work at the start of the flight but not in flight, that may suggest that the aircraft isn't in range of the navaid. Do you have any specific examples of naviads/approaches where they weren't picking up a signal? Then we can try and replicate it on our side.
Mark - Just Flight
-
Hi Mark,
One of the routes I like to do is EGBB-EICK. Departing runway 15 the RJ picks up the Honiley (HON 113.65) VOR, then I retune to the Compton(CPT114.35) VOR, then I retune to Strumble(113.1) VOR. These I tune on Nav 2 and all work fine. I then tune Nav 2 to the Cork(CRK114.6) VOR but because of the distance away it doesn't tune straight away.
I then set up the approach, with the ILS usually for runway 34 on Nav 1 (109.15)So all goes well until I tune the Cork VOR on Nav 2 and the ILS on Nav 1 which on this flight did not work.
I have flown this route before and not had a problem. Sometimes I've had the same problem at other airports, Vigo in Spain, Stavanger in Norway. These airports I have flown into at other times with no problem.
I always use RJ100 but can't see this being the problem, as no one else on the forum has reported any problems with tunning VOR's it must be something I am doing or not.
Great plane by the way.
Roger
