Which variables can I use to read your custom variables Black Square?

Black Square

L:bksq_AltitudePreselect_1, for altitude, L:bksq_VerticalSpeedPreselect_1 for vertical speed, and then the rest are the SimVars that you're used to, so...

A:AUTOPILOT HEADING LOCK
A:AUTOPILOT MAX BANK > 22
A:AUTOPILOT VERTICAL HOLD
A:AUTOPILOT FLIGHT LEVEL CHANGE
A:AUTOPILOT ALTITUDE LOCK
A:AUTOPILOT APPROACH HOLD
A:AUTOPILOT NAV1 LOCK
A:AUTOPILOT FLIGHT DIRECTOR ACTIVE
A:AUTOPILOT MASTER
A:AUTOPILOT AIRSPEED HOLD

There are a few more nuances that I could help you with, but that should be enough to get you started. Let me know if you need anything else!

toby23

This post is deleted!

toby23

@Black-Square - Thank you, is this the correct assignment for Autopilot buttons?

Black Square

Ok, here come the nuanced ones straight from the RPN. The rest are as you've listed.

Flight Director Off:
(A:AUTOPILOT FLIGHT DIRECTOR ACTIVE, bool) (A:AUTOPILOT MASTER, bool) ! and

IAS Profile:
(A:AUTOPILOT FLIGHT LEVEL CHANGE, bool) (L:var_iasHoldMode, bool) ! and (A:INDICATED ALTITUDE:1, FEET) 250 - (A:AUTOPILOT ALTITUDE LOCK VAR:1, FEET) < and

Descend:
(A:AUTOPILOT FLIGHT LEVEL CHANGE, bool) (L:var_iasHoldMode, bool) ! and (A:INDICATED ALTITUDE:1, FEET) 250 + (A:AUTOPILOT ALTITUDE LOCK VAR:1, FEET) < and

Airspeed hold:
(A:AUTOPILOT AIRSPEED HOLD, bool)
(A:AUTOPILOT FLIGHT LEVEL CHANGE, bool) (L:var_iasHoldMode, bool) and
or

toby23

I really appreciate you sharing these variables, thank you.

Black Square

Of course! Let me know what else I can do for you!

toby23

This post is deleted!

toby23

I cannot find a way to read if IAS or DES mode is active using SimVars.

I am reading A:AUTOPILOT FLIGHT LEVEL CHANGE, Bool to turn the 'green light' on for either the IAS or DES switch. Currently it turns both lights on when either mode is activated.

How can I 'read' which mode is active?

I can use RPN scripts but I cannot write them myself.

Thank you

Black Square

That's what the (A:INDICATED ALTITUDE:1, FEET) 250 - (A:AUTOPILOT ALTITUDE LOCK VAR:1, FEET) < and... sections of the code above is meant to do. It simply looks at whether the preselected altitude is commanding a climb or descent from the current altitude.

toby23

I thought so but adding it as a Script to the entry field doesn't work and I cannot figure out why. I use something similar to detect if 100 or 1000 ft is selected for the altitude dial in another profile, that uses this script.

but if I use your RPN code, it doesn't detect between IAS (IASP) or DES.

I will ask on the AAO forum and see if Lorby can help too. Thank you

toby23

@Black-Square It is slowly coming together...

One question for you, how have you configured the V/S readout?

In the image below, 2.1 shows the A:Var AUTOPILOT VERTICAL HOLD VAR, Feet/minute
BUT this is only correctly displayed when V/S mode is active.

In reverse, when the ALT mode is active, the ALT readout does not change on the Stream Deck profile but it does in the sim.

Q. When I turn the dial, I can see the VSpeed change in the sim cockpit but the correct value is ONLY displayed on the Stream Deck when V/S mode is active, why?

N.B.The Starship is the only aircraft where my profiles don't seem to work 'normally'.

Black Square

For both of them, you could try this technique:

Vertical Speed Select:

(A:AUTOPILOT VERTICAL HOLD, bool) if{
    (AUTOPILOT VERTICAL HOLD VAR:1, feet per minute)
}
els{
    (L:bksq_VerticalSpeedPreselect_1, feet per minute)
}

Altitude Select:

(A:AUTOPILOT ALTITUDE LOCK, bool) if{
    (AUTOPILOT ALTITUDE LOCK VAR:1, feet)
}
els{
    (L:bksq_AltitudePreselect_1, feet)
}

I'm not sure why that should be necessary for the selected altitude, but if it works, it works.

SaabFAN86

I'm also looking into getting data out of the starship, but for a different purpose: I want to use the WinWing MCDU or even a self-made CDU (the button-layout transfer from the MCDU to the Starship-CDU is way less intuitive than I thought) to interact with the starship CDU.
Best case, this includes the display of the Starship CDU being mirrored on the device.
I am using Mobiflight for this, so I need the data that is on screen in plain text form, including color information.

Is there any way to get that data? Or does it require an update of the Starship?