Turbo Arrows not working correctly after sim update 5
-
@Tailspin88 It works kind of if you release the hand brake with the mouse. But many controls like the gear are bugged.
-
It appears that SU5 has messed with the user's ability to control certain aspects of the cockpit via controller assignments, the parking brake being the obvious one but I'd imagine there will be others. I'd say as an initial reaction that it's a sim problem which will require some looking into. Just a thought for now, the one big thing that has changed within SU5 in regards to this is the cockpit interaction - try setting it to 'Legacy' (Go to General Options, Accessibility, Cockpit Interactions. Change it to Legacy). You may find that the controller functions still work or you may not, I don't know.
There seem to be those that love this new cockpit interaction and those that hate it. Personally, I turn off all tooltips when flying for enjoyment because they detract from the realism, so I've already binned the new interaction system :rolling_on_the_floor_laughing:
(Edited to say, I've been using the SU5 Beta since it was released and, using the mouse in the VC, I've yet to find a control that doesn't work. Tested all the PA28s like that, I have basic functions like gear, flaps, trim set on my Warthog and they still work so there was nothing to suggest that there would be a problem)
-
-
@Moridin said in Turbo Arrows not working correctly after sim update 5:
I’m getting a lot of banking to the left when flying. Irrespective of current winds.
Could be due to the missing co-pilot?
-
@corvus5624 I am flying solo. Hmm. Didn’t notice it this bad before. Much more delicate. Possible though if something was tweaked. Will test.
-
It would be good to maintain a list. I only made a simple VFR flight and had not used most of the nav equipments, but already have a list:
- Parking brake TOGGLE assignment turns brake ON instead of toggling (reported by others as well)
- Side window can't be opened
GPS is stuck in COM SETUP mode, I can't select any other modesGPS VOL Push ID button is spinning, but can be stopped- Battery refill is not reffilling to full. If battery is drained, one should start the aircraft with "Ready For Takeff" mode, wait until the battery is recharged and then save the state
- I have feelings that State Saving functionality is also compromized. Possibly fuel is not saved correctly or the values are reset by some known FS bugs around fuel quantity initialization
- Someone wrote that the HDG BUG change button lost the acceleration functionality. I can't confirm as I don't remember how it worked before.
I haven't flown the Arrow for some weeks, so I am not sure, but it seems the engine start procedure had slightly changed. Now I have to add a minimum power (throttle) when starting, otherwise the process halts. After starting I might set throttle to idle. This might be realistic (priming) and might have come with one of the Arrow updates.
UPDATE: The two GPS issues are related not to the default GPS but to the PMS-50 GNS mod. The default version works fine. The most up-to-date PMS-50 GNS is also working fine. So these are no issues.
-
GPS AP wasn't working. Heading hold worked fine, but GPS does not.
-
@ghrasko said in Turbo Arrows not working correctly after sim update 5:
GPS is stuck in COM SETUP mode, I can't select any other modes
GPS VOL Push ID button is spinning, but can be stoppedAre these issues occurring with the default or PMS-50 GNS? If it's the latter, have you installed the latest version of the GNS?
-
@Martyn said in Turbo Arrows not working correctly after sim update 5:
@ghrasko said in Turbo Arrows not working correctly after sim update 5:
GPS is stuck in COM SETUP mode, I can't select any other modes
GPS VOL Push ID button is spinning, but can be stoppedAre these issues occurring with the default or PMS-50 GNS? If it's the latter, have you installed the latest version of the GNS?
Dear Martyn, please can you let us know if there will be an updated version of the Arrows being made available to resolve the issues brought on by SU5? For example very difficult to activate Nav mode, and the heater cannot be turned on. Thanks.
-
-
-
hey...
some issues i run into after a short break with the sim...-
autopilot gets crazy when engaging
when pressing the HDG button (hdg is sync with the runway)
the yoke turns immediately to the left
same with NAV it turns slowly to the right -
have no magenta line in the Garmin` s when loading a plan
instead i have weird waypoint names that actually not in my flight plan
(i have to say , i use the pms50 GNS 530 mod)
minor isssues
-
interior co pilot model is gone
-
oxygen toggle is gone ( i think it was the "dump air" event in the sim)
very disapointed with the last su5 (not your fault .. i know)
thanks in advance
-
-
-
@voice-of-reason I have the latest version of the Turbo arrows installed. I went through programs and features to completely remove the last versions I had installed, then ran the new versions installer. The plane works well now, however, when flying on VATSIM, I noticed COMM1 and 2 and the transponder will change to a random set of numbers when airborn. On the ground they seem to stay as you set them. Once I takeoff, they all just change, making flying on VATSIM impossible. Tried with the GNS mod and without it. Same result both times.
-
yes i have 0.4.0 in my comunity folder (also the newest pms50 mod)
i removed the old version from the com folder and reinstalled it via the new 0.4.0 .exe installer
should i try to remove it completely from my system and install again ?
-
