Engine Model Accuracy
-
We have continued to beg Asobo for a fix to the light scattering in the developer forums, but there has been no engagement from Asobo since September of last year.
-
We have continued to beg Asobo for a fix to the light scattering in the developer forums, but there has been no engagement from Asobo since September of last year.
@Black-Square If I ever make a ton of money I'll buy my way into Asobo and start flipping over tables until it's fixed (amongst other more critical issues). For now we just have to be happy with what we have which begrudgingly is better than we've ever had before. It's almost more frustrating being so close to perfect and seeing no movement on issues that seem to pale in complexity when compared to everything else the sim can do.
-
We have continued to beg Asobo for a fix to the light scattering in the developer forums, but there has been no engagement from Asobo since September of last year.
@Black-Square can the volumetric effect be disabled until it fixed or flipswitch for this added to tablet?
-
Regarding Beta audio, I recorded some footage of the Blackbird PC-6 Turbo Porter.
https://youtu.be/ZQlqOhyAvdQ?si=NFF_1ZMaDFdaeip0
To me this sounds a lot better than the Caravan.
Regarding volumetric lights, you can tweak those yourself. In the "effects" folder you will find a number of .fx files, and one of these will be for landing lights, one for taxi, and so on. The structure of them is pretty simple, and at the bottom there is a chunk with the "volumetric" setting.
Most developers set that to 1, which makes it look like they are shining through fog even if there isn't any. If you set it to 0, then you don't see them at all, and worse they don't interact with cloud either. But if you set it to 0.01-0.05, then you can barely make the light cone out in normal weather, and they will then interact with clouds.
I made a post about this on the MSFS forums.
https://forums.flightsimulator.com/t/general-su5-beta-feedback-thread/757574/367
-
Regarding Beta audio, I recorded some footage of the Blackbird PC-6 Turbo Porter.
https://youtu.be/ZQlqOhyAvdQ?si=NFF_1ZMaDFdaeip0
To me this sounds a lot better than the Caravan.
Regarding volumetric lights, you can tweak those yourself. In the "effects" folder you will find a number of .fx files, and one of these will be for landing lights, one for taxi, and so on. The structure of them is pretty simple, and at the bottom there is a chunk with the "volumetric" setting.
Most developers set that to 1, which makes it look like they are shining through fog even if there isn't any. If you set it to 0, then you don't see them at all, and worse they don't interact with cloud either. But if you set it to 0.01-0.05, then you can barely make the light cone out in normal weather, and they will then interact with clouds.
I made a post about this on the MSFS forums.
https://forums.flightsimulator.com/t/general-su5-beta-feedback-thread/757574/367
@HobAnagerik that volumetric edit could also fix it for everyone if done by black square as it seems game developers have no intent to fix it game side.
-
It's not much more than a fudge, but it would work. I've applied it to all of the planes that I fly regularly.
There are many weird lighting issues with the sim that are too complex to discuss here without going massively off topic.
-
Hi Nick!
Thank you so much! What a wonderfully modeled aircraft!
Everything works beautifully!
The sounds are amazing.. The start procedure and the engine data during start and Take-off are really close.
The cruise data however is a little bit off.. I've got a couple 1000 hours on the real aircraft. and my comments on the cruise data is as follows:
We always cruise at Max Cruise power settings. on your Sim, I have the following altitude: 12,000 feet, 8 degrees Celsius. Using Max Cruise power setting of 1390 ft-lbs torque with 1750 rpm as per the aicraft POH. Your fuel flow is very close: 310 lbs/hr. Your ITT is 740 degrees.. ITT at Max Cruise power, with most airframe i have flown is between 695-710. most of them sit at 705. This is standard for most caravan at Max Cruise. Fuel flow is between 295-305 at that power setting.
The exact aircraft i flew today had the exact altitude and temperature at 12,000 and 8 degrees. 703 ITT and 301 Fuel Flow..
I know i'm nitpicking! just that 740 ITT at max cruise on your model.. should be a lot more conservative than that..
Beautiful aircraft that you have designed there! Thank you so much!
Best regards,
Amara -
Regarding Beta audio, I recorded some footage of the Blackbird PC-6 Turbo Porter.
https://youtu.be/ZQlqOhyAvdQ?si=NFF_1ZMaDFdaeip0
To me this sounds a lot better than the Caravan.
Regarding volumetric lights, you can tweak those yourself. In the "effects" folder you will find a number of .fx files, and one of these will be for landing lights, one for taxi, and so on. The structure of them is pretty simple, and at the bottom there is a chunk with the "volumetric" setting.
Most developers set that to 1, which makes it look like they are shining through fog even if there isn't any. If you set it to 0, then you don't see them at all, and worse they don't interact with cloud either. But if you set it to 0.01-0.05, then you can barely make the light cone out in normal weather, and they will then interact with clouds.
I made a post about this on the MSFS forums.
https://forums.flightsimulator.com/t/general-su5-beta-feedback-thread/757574/367
@HobAnagerik said in Engine Model Accuracy:
But if you set it to 0.01-0.05, then you can barely make the light cone out in normal weather, and they will then interact with clouds.
Is that really so? I'll try it immediately. On the developer support forums, we were convinced that it just became binary in MSFS 2024 (0=no effect, 1=virtually unusable), but perhaps we were all too frustrated to try crazy small values like 0.01. Of course, the moment I fix this for my entire fleet, Asobo will probably fix it on their end, unfixing it for me. I'll let you know what I find later.
-
It's not much more than a fudge, but it would work. I've applied it to all of the planes that I fly regularly.
There are many weird lighting issues with the sim that are too complex to discuss here without going massively off topic.
@HobAnagerik What I'm seeing is that any value from 0-1 written in the effect file gets converted to either 0 or 1 once the aircraft is loaded. You can still adjust the effect in the lighting debug dialog, but the file gets read as only a binary on/off.
-
You may be right. I had noticed that actually, but hadn't nailed down what was causing it. I assumed I had maybe broken something in the file.
If that were able to be reset somehow after spawn in it would be a great workaround.
