KA350 Condition Levers
-
@anderson
Repeat has been implemented but still the same results -
@anderson
Gone through a lot of programming but it's still the same results -
@meh1951 the very first condition should be
Your condition is different
Turb Eng Condition Lever Position:2 equals ((LOCAL:JOY .... <=100))
Delete this Turb Eng Condition Lever Position:2
Your condition
The correct condition
There's no Turbo Eng Condition Lever Position:2 in the first line.
Give it a try as indicated.
Anderson
-
@anderson
Are you talking about the
While TURB ENG CONDITION LEVER:2 equals ?? -
@anderson not sure I know how to do that
?
-
@anderson
This is what I am supposed to have ... correct?(([LOCAL:JOY_0X294B0X1901_Z_AXIS] >= 0) && ([LOCAL:JOY_0X294B0X1901_Z_AXIS] <= 25))
[TURB ENG CONDITION LEVER POSITION:2] != 0
B:FUEL_2_Condition_Lever_Cut_Off-Event
(([LOCAL:JOY_0X294B0X1901_Z_AXIS] >= 26) && ([LOCAL:JOY_0X294B0X1901_Z_AXIS] <= 74))
[TURB ENG CONDITION LEVER POSITION:2] != 1
B:FUEL_2_Condition_Lever_Low_Idle-Event
(([LOCAL:JOY_0X294B0X1901_Z_AXIS] >= 75) && ([LOCAL:JOY_0X294B0X1901_Z_AXIS] <= 100))
[TURB ENG CONDITION LEVER POSITION:2] != 2
B:FUEL_2_Condition_Lever_High_Idel-Event
-
@anderson
Was the screen shot at 28 correct?or is this
-
@meh1951 it looks okay, notice you set range 0 thru 15 for Cut Off and 26 thru 75 for Low Idle, there's a gap between 16 thru 25. Recommend you change the Low Idle range to 16 thru 75.
Let me know if it works.(It should)
Anderson
-
@anderson
Changed the range still does not work.The logic works but the Levers never move
-
@anderson
I got it! I don't know why but I was gonna work on and it was working today???
I really appreciate you sticking with be...I learned a bunch. Now I need to get some of this other stuff working. Thanks again!For anybody else
-
@anderson
Not working again...:-( -
@anderson how do you get those client events? My client events are blank, or it wants me to load an xml file containing them
-
@bjratchf
You can't do the client events since the latest version of SPAD. They close that option (said it was experimental). But as long as long as you have 9.13.33 it should still work.
Need for BKSQ to give us the same kind of variables (LVars) as they gave us for the TBM850. -
@bjratchf & @meh1951 you got to manually create these events listed below
Once you have created them you just need to create the scripts for sending the events as needed, like the example below
I have the latest SPAD version installed and just tested the B350 condition levers, they are working just fine using the events listed above.
Hope it helps you!