F28 Professional

@Mark thanks! Looking forward to both

I have just tested this on my side and triggering the TOGGLE AUTOPILOT ALTITUDE HOLD is engaging the ALT HOLD mode and the button can be seen animating and illuminating.

Can you confirm that you are testing this with the autopilot engaged? As the autopilot buttons will not illuminate if the autopilot is not engaged.

Mark - Just Flight

@Mark Now it was perfect, Mark! Sorry if I asked too many questions. Thank you very much!

Alan / From Brazil

Tks Mark!

Alan / From Brazil!

Thanks for the quick help!

Alan / From Brazil

Okay looks like this may have been a temporary problem. I disconnected the hardware, and restarted my PC. After the restart - things are back to normal.

Don't worry about that, Mark. I really appreciate it.
Thank you very much for your help.

We delayed the F28 release on Xbox for almost a year after the PC release so we could ensure that the product we delivered was as optimised as it could be on consoles. Therefore the latest build of the F28 is as optimised as it can get on consoles. The general performance on Xbox will likely improve in the future with the performance optimisations that Asobo/Mircorosft are expecting to bring to Xbox in MSFS 2024 and Sim Update 16.

If you are struggling with performance with any of our aircraft on Xbox, we do have the following FAQ that provides some additional recommendations that could improve the performance: https://support.justflight.com/en/support/solutions/articles/17000142069-performance-tips-for-xbox-consoles

Mark - Just Flight

Hey, thanks to the team and you Mark for listening to the feedbacks. Can't wait for this nice update and fly with a FMC! Good luck with the rest of the work <3

That's why we are in a hurry to have the UNS ;)

Yes, I hope that as well! The KLN90B would be the perfect fit for the F28.

Thank you for the request. We have logged this on our internal feature request tracker and this should be something we will be able to look into for the upcoming Version 2 update to the F28 Professional.

Mark - Just Flight

We have just looked into the pilot visibility on the F28 exterior on Xbox and this looks like it is something that is being controlled by the simulator as a performance-saving measure.

For example, if you load into a small regional airport you'll likely notice that the pilots will be visible on the exterior and they may disappear once the drone camera is moved a certain distance away from the aircraft, but if you then load into a large international airport like EGLL or KJFK, you will likely notice that the pilots will only be visible when the drone camera is much closer to the aircraft (if at all).

Unfortunately, I'm not sure if there will be anything we will be able to do to improve this as it looks to be something that is being controlled by the simulator due to performance constraints, but we have logged it on our internal bugs tracker to investigate further.

Mark - Just Flight

@Mark Thanks for your response, I solved the problem and thankfully it was nothing to do with your aircraft.

My Honeycomb Bravo, annoying, has developed axis jitter. I had the same issue with a single engine the other day (I have 2 axes bound to physical fuel control levers) and the axis moved to a position where the engine cut out.

I have just checked each of the F28 variants and this isn't something I am able to replicate on my end. Could kindly open a ticket with our support team via the following link and they will be able to assist with troubleshooting this: https://www.justflight.com/support

Mark - Just Flight

We don't have a firm release date set for the F28 V2 update just yet but our target is certainly less than 6 months. There has been some significant progress made in the last few months and we will be sharing more information on what will be included in the F28 V2 update very soon.

Mark - Just Flight

@Lobster404 That's a great solution! I too had issues with that start engine button (I use Spad Next) What I would do is spam the LVAR many times over a few seconds and that would usually do it but this solution looks better.

I program a short press as the #2 engine and a long press as #1 engine.

My setup with a Loupedeck: https://youtu.be/IFQsMRxZ-kk?si=Q8A5TFLIAkXru2fK

Thanks for sharing!