Baron Pro Throttle/Power Issue
-
I have been using Spad.Next to bind some lights and other switches to my logitech switch panel. I also used my CH Throttle Quadrant buttons to bind the dimmers for the flood light and panel lights. I didn't change any axis or throttle settings anywhere. Now when I throttle up for take off the manifold gauges are erratic and I can't achieve full power. I have uninstalled and reinstalled the aircraft. I have returned to the default profile in Spad.Next that I was initially using with great success prior to making any changes. I'm not getting the issue in any other aircraft, including the Black Square Analog Baron. I'm really stumped and stuck on how to troubleshoot this, or, what I might have done to cause the issue. Never had this happen before.
-
I suspect you may have sat on the ramp with the engines running at idle with full mixture for long enough to foul the spark plugs. Try pressing the "Clean Plugs" button on the engine visualizer, and let me know if that solves your problem.
