G3X in bonanza

xavierp

I’m still working on it. Everything lights up correctly, but the main challenges are:

Structuring the XML file properly. What to keep, what to remove so the G3X works but then I don't break all your Aircraft logic. I’m completely new to this, still trying to understand the logic, and I suppose I’ll eventually get there. I think that this will be the hard part for me as once this is done, i can use your systems, engines files and doc online or real manuals to populate the right values (so i considering this the easiest part maybe wrongly)
No matter how good the integration is done, it will still be a quick dirty work around and not a full virtual cockpit.

xavierp

You can contact me via the contact page here motionforsimulators.com

xavierp

This post is deleted!

xavierp

This post is deleted!

xavierp

Replace all of the CIRCUIT ON:NN values with CIRCUIT ON:48 for testing. This will make sure everything is powered and working for now. -> did you mean 38? (i tried both)
These are my files so far, i can't get power to the gauges
https://limewire.com/d/6UQE9#ZtePYYK5j9

Black Square

Circuit #48 should do the trick as long as the avionics switch is on. Circuit #38 is some panel lighting circuit. You could try circuit #2 if you wanted to bypass the switch and just use battery power.

Your files look like a pretty good start! I'll send you a quick message on your contact form so you can get in touch with me directly, in case it makes anything easier.

Bradsena

@xavierp you are missing this in your panel xml:

<Instrument>
		<Name>G3XTouch_1</Name>
		<Electric>
			<Simvar name="CIRCUIT ON:52" unit="Boolean"/>
		</Electric>

		<ElevatorTrim/>
		<RudderTrim/>
	</Instrument>

	<Instrument>
		<Name>G3XTouch_2</Name>
		<Electric>
			<Simvar name="CIRCUIT ON:53" unit="Boolean"/>
		</Electric>
	</Instrument>

I'm doing pretty much the same modification as you are but for Garmin G1000. I've done it in the past on other planes, for now I failed with the bonanza/baron but we can help each other!

xavierp

@Bradsena Hello and thanks. I checked and this was in my xml (you can check my file on the limwire download link above). I had the circuit on 38 though

xavierp

FYI, i just tried to edit my xml with 53 and 52 as you suggested but it was still not working. At this time, i can only give up and wait for Nick's support)

Black Square

@xavierp I just wanted to let you know that I've received your emails, and I will discuss your project further. You just caught me on Thanksgiving week in the US, which comes right after my birthday, so it's when I often take some time away from my desk.

xavierp

No rush intend. Enjoy family.