Bonanza EDM-800 show the EGT and fuel flow
-
After performing the ROP or LOP procedure, the manual says "This configuration can be further monitored by pressing the “LEAN FIND” button, which will show the EGT of the first cylinder to peak, and the fuel flow relative to peak," but nothing happens to me when I click LEAN FIND. Am I doing something wrong?
-
Does this clip from the Analog Baron help you to see anything that might be amiss?
-
I follow the procedure exactly as shown in the video, but then, when the mixture is at the correct point, the manual says that if I click on "lean find" it will show the EGT of the first cylinder to peak, and the fuel flow relative to peak. However, clicking on "lean find" does nothing, unlike the Duke, where everything happens as described in the manual.
-
If you're following exactly the procedure in the video, and you're already familiar with the Duke, then I can't really imagine what's happening (or rather not happening) for you. Do you think you could record a video next time you're flying to show me?
-
Here are three image links to try and explain better. I did the LOP test on both the Baron and the Bonanza to illustrate. After setting the mixture to the correct position, I can see the degrees relative to the EGT peak (Baron photo 1). Then, pressing "lean find," I can see the EGT of the lEGT of the last cylinder to peak and the fuel consumption relative to that peak (Baron photo 2). Doing the same thing on the Bonanza, the first step is the same as the Baron (Bonanza photo 1), but then pressing "lean find" nothing happens, so I can't see the same information as in Baron photo 2.
https://drive.google.com/drive/folders/1MyA-E0RtHKx5s6_vApTJaBew1u_F-SDb?usp=drive_link
I apologize for my English, but it's not my native language.
I know this might seem like a small detail, but your planes are different from others because of the details.
