efb strobe light indicator
-
curious if i am doing something wrong. on the electrical page on the efb, the stobe lights are not green (see screencap). i can confirm the switch for nav/strobe is in the full-down position and i can also confirm that the plane is not indicating any failures on the efb page.
-
Just tried this out over here, and I have no problem. Do you possibly have a hardware binding that's interfering with the strobe lights? I couldn't use the native binding, unfortunately, since there is no way to natively support three position switches of this type.
-
Just tried this out over here, and I have no problem. Do you possibly have a hardware binding that's interfering with the strobe lights? I couldn't use the native binding, unfortunately, since there is no way to natively support three position switches of this type.
@Black-Square yes, that was 100% the problem. i forgot about it because i am not using it on this plane due to the 3-way switches. thanks for your help. sorry to bug you with my silly oversight :|
