Flight Plan Loading Problem with BlackSquare Baron Bonanza and TBM850
-
If I create a flight plan with LittleNavMap (LNM), export the plan to MSFS .pln file, then load that file into the SIM, it appears to load. After selecting a start position in MSFS, I the start aircraft (with G530/430) also selected. Almost 100% of the time, I see no plan waypoints in the GPS's and have to manually enter them to continue, or fly heading. Thats fine for short flights often I fly to non-airport waypoints and that creates another problem. Why is this annoying bug not yet solved? These aircraft are otherwise great to fly, but the experience is of course spoilt by this bug/s. I have eliminated most, or all other, items in the Commmunity folder but to no avail!
-
Sorry this issue is bothering you. Unfortunately, this is a bug in the Working Title GNS 530, and is completely up to them to solve. I have requested that it be fixed several times, and have attempted to create my own modification to their hot-swapping code to prevent this from happening, but to no avail.
I return to improve something in the GNS every month or two, so I will revisit this yet again next time. I can't promise that I will have any breakthroughs, but I will consider publishing a modification that contains all my improvements to the GNS if I can find one. Very sorry once again, but as it stands, this is something that must be fixed by Working Title.
-
Thanks for explanation, maybe I will start pestering Working Title. I dont use the GTN750 at all, prefer the older instruments, but nevertheless, it still happens too often. Great pity to have relatively expensive payware and get these problems.
Actually, I also see that the aircraft dont always save their current state on shutdown. I usually go back to cold and dark, with G530/430 chosen. But on restart, the GTN750 bezel is present, will see if I get a plan to load when aircraft loads G530, from cold.
Is it possible to force a particular loading configuration in the aircraft configuration file??
