Localiser and glideslope capture not very accurate
-
Hi there,
I’ve noticed that the ILS capture behaviour on V2 is not very good, particularly the glideslope, which it’s currently maintaining at about 1 dot below. Has anyone else experienced this? Makes approach particularly into EGLC quite difficult. -
I have done at least 5 ILS approaches in the V2 in different airports and was about to post the same, seems to be capture fine but for me the GS has is either 1 dot high or 1 dot low which in IFR conditions with low vis isn't great
-
Is this after you're established on the ILS in the final landing configuration (flaps and gear), and stable at VREF + 5 to 10?
There were no intentional changes to this logic or area of the flight model in the v2 update. Do you remember getting the same issue with v1?
-
Entirely stable, VREF +5, fully established and configured. Now you come to mention it, it may have been on V1 too actually, may be more pronounced on V2 though
-
I've had glideslope issues going back to v1. There was a thread about it. Still having same problems in v2.
