ILS inop after start from cold and dark

RetiredMan93231

Are you following the startup checklists...? Did you set the AHRS (Leg Panel) to SLV...?

Martyn

This will be fixed in the next update. In the meantime please make sure the VHF, UHF and ILS radios are all switched on.

Wothan

@martyn said in ILS inop after start from cold and dark:

This will be fixed in the next update. In the meantime please make sure the VHF, UHF and ILS radios are all switched on.

Thank You for Your quick reply.

Wothan

@retiredman93231 said in ILS inop after start from cold and dark:

Are you following the startup checklists...? Did you set the AHRS (Leg Panel) to SLV...?

Yep - but regardless, the ILS should not be affected by the ARHS.

RetiredMan93231

Here is an excellent new YouTube video that goes through the entire cold and dark startup process... It even includes some very impressive airshow manuevers at the end! https://youtu.be/TqDILAAc9aA

RetiredMan93231

@wothan said in ILS inop after start from cold and dark:

Yep - but regardless, the ILS should not be affected by the ARHS.

The HSI requires the AHRS to operate...

Wothan

This post is deleted!

Wothan

The problem is that all radios needs to be turned on for the ILS radio to work.

I had forgotten to turn the UHF (COM 2) Radio on.
This should not be necessary in real life, but a fix is comming.

b3lt3r

I have also found that on the ground, ILS will not come alive despite being tuned correctly and all the radios in the correct state. I suspect it' may be because I pre-tuned the freq before setting the radio states. Anyway, the fix for me is simple - change digit 1 by 1 notch and then set back to correct freq and it comes alive.

Martyn

@b3lt3r That is also fixed in the update