Problems after the latest MSFS update
-
After the Hot fix for MSFS yesterday with a lot of fixes the most problems are gone
Ive got 20-25 more FPS so I am happy with that.The PA-28-161 WARRIOR II 0.1.1 is working fine no problems at all.
Only the Co-pilot is gone.PA-28R ARROW III 0.80
All the animations inside and outside are not working or responding
except the prop ,strobe light and the Beacon are working normalthe yokes are total twisted to the left and are frozen in that position
So all the gauges are frozen in the cold and dark position even the engine is running
nothing responds
Only the sound is responding you can hear all the clicks1.Landing Gear is not reacting
2.Trim is not working
3.Flaps not working
4.Tablet is not responding (commands)
5.Tablet Security Failure (message Black)
also the Co-pilot is gonePA-28R ARROW III/IV Turbo 0.30
Exactly the same problems as written aboveA new update for the PA-28R ARROW and the PA-28R ARROW III/IV Turbo is rely wanted
Thank you -
Yeah, I have tried the Arrow III and I am getting the same results. That's after cleaning out the Community Folder. Unfortunately, AP went also berserk and sent me into the water. I switched from HDG to NAV, set to GPS and instead of moving from bearing to gps waypoint it completely sent me into the water after stalling. My speed was high enough and I was at ALT 3900 out of KAVX. Very random and this hasn't happened to me since it was first released.
-
My park brake is no longer toggling to add to the list of jobs.
@stevejb1957 Same as you，the parking break can't release
-
@stevejb1957 Same as you，the parking break can't release
@hu807 said in Problems after the latest MSFS update:
the parking break can't release
The workaround for now is simply to use the mouse to release the parking brake. Seems like key bindings don't work, it immediately re-engages (the lever moves immediately back).
I don't have the other major issues listed here though. Had the Security error but after reinstall (no uninstall+install but simply run installer again) all was fine.
-
I have no parking brake problems, works fine with assigned button, but the aircraft will not track a VOR radial, tunes to the frequency fine, OBS knob finds radial fine, but in Omni or Nav mode the aircraft ignores the radial and just wanders off.
-
I too have the parking brake not responding to key input and the AP not following the course in NAV mode. This is the same on both the Arrow and the Turbo Arrow.
-
I have no parking brake problems, works fine with assigned button, but the aircraft will not track a VOR radial, tunes to the frequency fine, OBS knob finds radial fine, but in Omni or Nav mode the aircraft ignores the radial and just wanders off.
@sandhill Make sure the HDG switch is set to ON, in addition to selecting NAV mode.
-
We haven't been able to reproduce the issue with the parking brake handle so please get in touch with our support team via a ticket if you are still encountering that so we can investigate further.
Please refer to the change log thread for info on other upcoming fixes - https://community.justflight.com/topic/1806/update-change-logs-v0-9-0-released-edited-09-11-21
