Problems after the latest MSFS update

boos

After the Hot fix for MSFS yesterday with a lot of fixes the most problems are gone
Ive got 20-25 more FPS so I am happy with that.

The PA-28-161 WARRIOR II 0.1.1 is working fine no problems at all.
Only the Co-pilot is gone.

PA-28R ARROW III 0.80
All the animations inside and outside are not working or responding
except the prop ,strobe light and the Beacon are working normal

the yokes are total twisted to the left and are frozen in that position
So all the gauges are frozen in the cold and dark position even the engine is running
nothing responds
Only the sound is responding you can hear all the clicks

1.Landing Gear is not reacting
2.Trim is not working
3.Flaps not working
4.Tablet is not responding (commands)
5.Tablet Security Failure (message Black)
also the Co-pilot is gone

PA-28R ARROW III/IV Turbo 0.30
Exactly the same problems as written above

A new update for the PA-28R ARROW and the PA-28R ARROW III/IV Turbo is rely wanted
Thank you

stevejb1957

My park brake is no longer toggling to add to the list of jobs.

lagin

I share this problem with the parking brake, but it isn't just Just Flight Planes. I have the Trinidad and it is doing the same thing. Seems to be a problem with some third party planes. Not just the arrows.

Martyn

@boos Nearly all those issues are due to the security failure. Can you confirm that you reinstalled the PA28s using the exe installers after updating MSFS?

boos

Yes I did
A total clean install even the community file is empty
all the problems are still there.

Thank you for your reply

Sonosusto

Yeah, I have tried the Arrow III and I am getting the same results. That's after cleaning out the Community Folder. Unfortunately, AP went also berserk and sent me into the water. I switched from HDG to NAV, set to GPS and instead of moving from bearing to gps waypoint it completely sent me into the water after stalling. My speed was high enough and I was at ALT 3900 out of KAVX. Very random and this hasn't happened to me since it was first released.

HU807

@stevejb1957 Same as you，the parking break can't release

copper

@hu807 said in Problems after the latest MSFS update:

the parking break can't release

The workaround for now is simply to use the mouse to release the parking brake. Seems like key bindings don't work, it immediately re-engages (the lever moves immediately back).

I don't have the other major issues listed here though. Had the Security error but after reinstall (no uninstall+install but simply run installer again) all was fine.

Sandhill

I have no parking brake problems, works fine with assigned button, but the aircraft will not track a VOR radial, tunes to the frequency fine, OBS knob finds radial fine, but in Omni or Nav mode the aircraft ignores the radial and just wanders off.

petesmiffy

I too have the parking brake not responding to key input and the AP not following the course in NAV mode. This is the same on both the Arrow and the Turbo Arrow.

fedar92

How jealous of the Hawk...second update and our pa28's arrows and warrior waiting, with education patience and understanding, but waiting. I have no doubt that this week from what I read, it will be coming to us as well.

RetiredMan93231

@sandhill Make sure the HDG switch is set to ON, in addition to selecting NAV mode.

Martyn

We haven't been able to reproduce the issue with the parking brake handle so please get in touch with our support team via a ticket if you are still encountering that so we can investigate further.

Please refer to the change log thread for info on other upcoming fixes - https://community.justflight.com/topic/1806/update-change-logs-v0-9-0-released-edited-09-11-21