Real Life NAV/GPS Mode Switch and Annunciators
-
This post is deleted!
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
Martyn, just tie the NAV1 radio to the autopilot.
Full stop, no clickspot.First you totally agreed with my post, so I don't understand why you would then suggest this? That would be a pretty poor compromise :( . It would remove the ability to use the GPS 100 to follow a course and would be unrealistic because the GPS 100 installation should include this switch.
-
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
Martyn, just tie the NAV1 radio to the autopilot.
Full stop, no clickspot.First you totally agreed with my post, so I don't understand why you would then suggest this? That would be a pretty poor compromise :( . It would remove the ability to use the GPS 100 to follow a course and would be unrealistic because the GPS 100 installation should include this switch.
@Sender46 said in Real Life NAV/GPS Mode Switch and Annunciators:
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
Martyn, just tie the NAV1 radio to the autopilot.
Full stop, no clickspot.First you totally agreed with my post, so I don't understand why you would then suggest this? That would be a pretty poor compromise :( . It would remove the ability to use the GPS 100 to follow a course and would be unrealistic because the GPS 100 installation should include this switch.
IMHO, there are two ways to fix this:
-
Add a designated NAV/GPS switch, as you suggest
-
Untie the GPS from the autopilot and HSI
I agree that the first would be a better option, but Martyn seems determined to not add the switch (because he cannot find it in the real airplane?)
So, I am offering a second option which would be simpler to implement.
-
-
Our cockpit is based 100% on the real world G-BGKU based at my flying club. That wasn't fitted with any GPS/NAV switch so we opted for a click spot rather than adding a fictitious switch somewhere, but can certainly look at adding one if reference photos are supplied.
Although we are keen to support different GPS units, there is a limit to how far we can go with customising the configurations for each, so it's unlikely that we'll be adding GPS/NAV switches that are unique to each GPS option.
@Bert Pieke You're obviously either not keeping up with all the posts, or maybe you are misunderstanding. See Martyn's post yesterday, which included this:
@Martyn said in Real Life NAV/GPS Mode Switch and Annunciators:
... but can certainly look at adding one if reference photos are supplied.
I have provided a reference photo of the switch in a real PA-28 as he requested (see my post replying to Martyn yesterday, which it appears you have also missed) and I have also provided it to Support.
-
@Bert Pieke You're obviously either not keeping up with all the posts, or maybe you are misunderstanding. See Martyn's post yesterday, which included this:
@Martyn said in Real Life NAV/GPS Mode Switch and Annunciators:
... but can certainly look at adding one if reference photos are supplied.
I have provided a reference photo of the switch in a real PA-28 as he requested (see my post replying to Martyn yesterday, which it appears you have also missed) and I have also provided it to Support.
@Sender46 said in Real Life NAV/GPS Mode Switch and Annunciators:
@Bert Pieke You're obviously either not keeping up with all the posts, or maybe you are misunderstanding. See Martyn's post yesterday, which included this:
@Martyn said in Real Life NAV/GPS Mode Switch and Annunciators:
... but can certainly look at adding one if reference photos are supplied.
I have provided a reference photo of the switch in a real PA-28 as he requested (see my post replying to Martyn yesterday, which it appears you have also missed) and I have also provided it to Support.
OK, if they follow your suggestion, everyone will be happy!
-
@Sender46 said in Real Life NAV/GPS Mode Switch and Annunciators:
@Bert Pieke You're obviously either not keeping up with all the posts, or maybe you are misunderstanding. See Martyn's post yesterday, which included this:
@Martyn said in Real Life NAV/GPS Mode Switch and Annunciators:
... but can certainly look at adding one if reference photos are supplied.
I have provided a reference photo of the switch in a real PA-28 as he requested (see my post replying to Martyn yesterday, which it appears you have also missed) and I have also provided it to Support.
OK, if they follow your suggestion, everyone will be happy!
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
OK, if they follow your suggestion, everyone will be happy!
Fingers crossed :)
-
@Martyn That is a nice switch, but it is only required in the GPS100 panel.. :slightly_smiling_face:
I hope the screenshot is a teaser only, for seeing the switch in GPS mode and the GTN in VLOC mode, would not be a good combination..
Having said that, I do like the filler panel where the GPS100 used to be! -
@Martyn That is a nice switch, but it is only required in the GPS100 panel.. :slightly_smiling_face:
I hope the screenshot is a teaser only, for seeing the switch in GPS mode and the GTN in VLOC mode, would not be a good combination..
Having said that, I do like the filler panel where the GPS100 used to be!@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
@Martyn That is a nice switch, but it is only required in the GPS100 panel.. :slightly_smiling_face:
I hope the screenshot is a teaser only, for seeing the switch in GPS mode and the GTN in VLOC mode, would not be a good combination..I don't think that's necessarily unrealistic, so it's not an issue at all for me. If a real aircraft was upgraded from a GPS 100 to a GTN 750, the NAV/GPS switch would already have been there and could have just been left there and be unused. Having an unused switch there doesn't cause any problem with the operation of the aircraft or the GTN 750. And the switch is quite subtle and unobtrusive the way JF have added it anyway.
Why make it more difficult than it needs to be when we now have what is in my opinion a good solution?
-
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
@Martyn That is a nice switch, but it is only required in the GPS100 panel.. :slightly_smiling_face:
I hope the screenshot is a teaser only, for seeing the switch in GPS mode and the GTN in VLOC mode, would not be a good combination..I don't think that's necessarily unrealistic, so it's not an issue at all for me. If a real aircraft was upgraded from a GPS 100 to a GTN 750, the NAV/GPS switch would already have been there and could have just been left there and be unused. Having an unused switch there doesn't cause any problem with the operation of the aircraft or the GTN 750. And the switch is quite subtle and unobtrusive the way JF have added it anyway.
Why make it more difficult than it needs to be when we now have what is in my opinion a good solution?
@Sender46
Is that what INOP stickers are for?
