Real Life NAV/GPS Mode Switch and Annunciators
-
@Cristi-Neagu Perhaps I'm misreading what you said but, why can't the switch be there when the GPS100 is selected, but have no switch otherwise? Wouldn't that be the most realistic?
Whatever would be in the IRL aircraft with a GPS100 should be there in the sim when GPS100, and whatever would be in the IRL aircraft with a GNS530 should be there when the GNS530 is selected.
-
@Sender46 I know there have been comments on this hidden clickspot issue in posts by others in other threads, so for information here's the very quick response from Craig (cut and paste from e-mail):
"Unfortunately, this has been the way of the Arrow III since its original release some 3 years ago and we have kept in keeping with the aircraft that we original went to do our research on that did not have a GPS100 installed. We will not be able to go over to and have compromised as much as we can with this and have not had anyone else comment on this."
-
Our cockpit is based 100% on the real world G-BGKU based at my flying club. That wasn't fitted with any GPS/NAV switch so we opted for a click spot rather than adding a fictitious switch somewhere, but can certainly look at adding one if reference photos are supplied.
Although we are keen to support different GPS units, there is a limit to how far we can go with customising the configurations for each, so it's unlikely that we'll be adding GPS/NAV switches that are unique to each GPS option.
-
@Martyn Thank you for considering this. The thing is, this switch is not fictitious. It is a real life requirement when a GPS 100 is fitted, as stated in the Garmin installation manual.
See photo below of a PA-28 showing a real life example of a NAV/GPS switch fitted with a GPS 100:
(found here: https://aeroclassifieds.com/aircraft-for-sale/piper-pa28r-200-arrow-ii/)
It's not strictly as per the Garmin installation manual in terms of the annunciators but it is a real life example that serves the purpose of switching between NAV and GPS modes and obviously the position of the switch can be seen so that you know what mode you are in.
The exact wording of the labels would be the installer's choice, so they could be reduced to just NAV and GPS and still be realistic (if necessary to avoid possibly clashing with the existing CAUTION notice in your panel). The switch doesn't even have to be in exactly the same position because it would be fitted wherever each individual GPS 100 installer chose to fit it.
Hope this helps :)
P.S.
And it only needs to be shown for the GPS 100 option (so it won't spoil the realism for 430 and 530 users). -
Totally agree, and have previously asked for just that in the MSFS support forum.. with no response..
https://community.justflight.com/topic/2059/we-need-a-nav-gps-switch-for-the-arrow
-
This post is deleted!
-
@Bert-Pieke
Edit: As an alternative.. not the preferred option!If Just Flight were looking for a simple fix, they would tie the autopilot to the NAV1 radio, and not provide any means to change that. (In the G100 panel)
-
This post is deleted!
-
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
Martyn, just tie the NAV1 radio to the autopilot.
Full stop, no clickspot.First you totally agreed with my post, so I don't understand why you would then suggest this? That would be a pretty poor compromise :( . It would remove the ability to use the GPS 100 to follow a course and would be unrealistic because the GPS 100 installation should include this switch.
-
@Sender46 said in Real Life NAV/GPS Mode Switch and Annunciators:
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
Martyn, just tie the NAV1 radio to the autopilot.
Full stop, no clickspot.First you totally agreed with my post, so I don't understand why you would then suggest this? That would be a pretty poor compromise :( . It would remove the ability to use the GPS 100 to follow a course and would be unrealistic because the GPS 100 installation should include this switch.
IMHO, there are two ways to fix this:
-
Add a designated NAV/GPS switch, as you suggest
-
Untie the GPS from the autopilot and HSI
I agree that the first would be a better option, but Martyn seems determined to not add the switch (because he cannot find it in the real airplane?)
So, I am offering a second option which would be simpler to implement.
-
-
@Bert Pieke You're obviously either not keeping up with all the posts, or maybe you are misunderstanding. See Martyn's post yesterday, which included this:
@Martyn said in Real Life NAV/GPS Mode Switch and Annunciators:
... but can certainly look at adding one if reference photos are supplied.
I have provided a reference photo of the switch in a real PA-28 as he requested (see my post replying to Martyn yesterday, which it appears you have also missed) and I have also provided it to Support.
-
@Sender46 said in Real Life NAV/GPS Mode Switch and Annunciators:
@Bert Pieke You're obviously either not keeping up with all the posts, or maybe you are misunderstanding. See Martyn's post yesterday, which included this:
@Martyn said in Real Life NAV/GPS Mode Switch and Annunciators:
... but can certainly look at adding one if reference photos are supplied.
I have provided a reference photo of the switch in a real PA-28 as he requested (see my post replying to Martyn yesterday, which it appears you have also missed) and I have also provided it to Support.
OK, if they follow your suggestion, everyone will be happy!
-
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
OK, if they follow your suggestion, everyone will be happy!
Fingers crossed :)
-
@Martyn That is a nice switch, but it is only required in the GPS100 panel.. :slightly_smiling_face:
I hope the screenshot is a teaser only, for seeing the switch in GPS mode and the GTN in VLOC mode, would not be a good combination..
Having said that, I do like the filler panel where the GPS100 used to be! -
@Bert-Pieke said in Real Life NAV/GPS Mode Switch and Annunciators:
@Martyn That is a nice switch, but it is only required in the GPS100 panel.. :slightly_smiling_face:
I hope the screenshot is a teaser only, for seeing the switch in GPS mode and the GTN in VLOC mode, would not be a good combination..I don't think that's necessarily unrealistic, so it's not an issue at all for me. If a real aircraft was upgraded from a GPS 100 to a GTN 750, the NAV/GPS switch would already have been there and could have just been left there and be unused. Having an unused switch there doesn't cause any problem with the operation of the aircraft or the GTN 750. And the switch is quite subtle and unobtrusive the way JF have added it anyway.
Why make it more difficult than it needs to be when we now have what is in my opinion a good solution?
