Logitech Switch panel with the Arrow
-
The "Set" commands ARE supported for Spad.next. That's what I'm using for this Plane. The problem with "Light ON/OFF" is it causes the dreaded 10 deg bug. Maybe it will different after the next Sim update, I don't know. But for NOW the "set" commands are curing that problem.
I don't think the "set" commands are available direct in the sim though, I'm not sure. I switched to Spad.next specifically to avoid that bug and use my autopilot encoders as they should be.
-
@Tigerclaw , I have the SET commands currently configured in MSFS for my Honeycomb ALPHA yoke, and they do work with this aircraft as they should. But, unfortunately that doesn't cure the 10 degree bug... so, we'll have to wait for Asobo to eventually fix that!
-
@Tigerclaw said in Logitech Switch panel with the Arrow:
Yep, that's why I invested in Spad.next and what a headache that was/is. It's powerful, I give it that, but man the learning curve is so intense. I hope Asobo DO fix the 10deg bug, its been driving me nuts since I bought the Alpha.
For the alpha and bravo...any switch that is not sprung momentary, in spad set switch type as "simple pushbutton" and for modifier tell each action to press and release and you won't get the switch spamming the sim.
-
@sluflyer06 Thanks, I’ll give that a try. I’ve got that part (10deg bug) working fine for now, just having a few problems choosing which variable to use for different switches/functions. Getting there though 🙂
-
@Martyn Is there a program that will tell you exactly what is being commanded by each switch press? Logitech uses drivers so it's hard to see exactly what they are doing. But I do know in the default airplanes the switches work as they should. Bat On turns on the battery, battery off turns off the battery (master), etc.
This is what the panel looks like and I just assumed that someone at JustFlight would of had one.
-
@Phantoms Spad.next is worth of trying. I use it for configuring Logitech flight devices. Yes it cost some money, but there is free 14 days demo for trying. OMHO, it is worth of money for Logitech users. And it can be used WITHOUT Logitech plugin drivers, some users have reported problems with it.
-
I’m 100% sure it will be fixed, anything else would be scandalous at this price. But give them time. The trend nowadays is to release unfinished products to let the paying customers be beta testers. But it will be fixed eventually.
-
@Kaukinen I did give Spad ago and didn't have much luck. My worry is even if I did get Spad working with the Arrow and everything set up and assigned, then I would also have to set it up with every single other aircraft which all work fine with the logitech drivers including the Mooney save it's fuel switch. That seems pretty daunting when it's just this one plane causing havoc with it.
-
@Phantoms , You should be able to tell what commands each of the switches and buttons are are assigned to by first pressing [ESC] and opening the CONTROLS screen in MSFS. Then select the SEARCH BY INPUT box and just flip a switch to see what command it is currently assigned to.
-
@RetiredMan93231 Unfortunately, Logitech/Saitek panels do not show in the controls so that method doesn't work. They are operated by drivers.
This really takes away from the enjoyment of the Arrow and has turned me off to purchasing the Turbo Arrow when it comes out. The logitech panels are not like an extremely rare item. Once you get past yokes, joysticks, rudders and throttles then they are probably the next in terms of usage for MSFS.
I know I could use Spad, but spad would involve programming the panel for each individual plane. It would also require doing so for my autopilot multi panel. Spad does not coexist with the logitech drivers. It is a hugely daunting task when the panels already have drivers for them that work all the default and deluxe planes correctly. They also work with the Carenado Mooney correctly too. If Just Flight can not get them to control the Arrow correctly, then that doesn't bode well for any future Just Flight purchases for me. @Cdr_Maverick
-
"....Someone has already made a Piper Arrow setup for on Spad, so you can just "download" it and activate. I also have one that I made..."
@HalalPilot could you share the link or your config?
Thanks -
I found a SPAD.neXt config (from CaptCarran) and completed it. You can look in SPAD.neXt under Online Profiles: Justflight PA28R Arrow III
-
@Cdr_Maverick I tested the profile you suggested but when it comes to turn off the panel lights it´s not working for me. Monitoring the CENTRE_LOWER_PANEL_LIGHT (LVAR) I noticed it didn't change to 10 when turning on the switch panel.
I was able to fix it though, it is not a good code but it works :)
You add as many lines for LIGHT_POTENTIOMETER_INC (parameter 3) as you want to get the proper light bright in the instruments is best for you. I could no find a single command to replace such coding (unfortunately)
I setup the Cowl switch to turn on/off the cabin light
I cannot share the profile in SpadNext for it's on trial yet, I might buy a license in the near future I hope, its been very useful and gives a new whole set of options to configure the Logitech switch panel.
-
I forgot to mention it only works when TIME OF DAY is 0, 2 or 3 .. if it's 1 the panel light does not turn on.
TIME OF DAY 1 = Daylight
TIME OF DAY 2 = Evening
TIME OF DAY 3 = Night
TIME OF DAY 0 = Morning (before sunlight) -
@anderson if you have a trial then you do not have the SPAD.neXr Beta which is necessary for the LVAR support. That might be the difference. Panel works well for me.
-
@Cdr_Maverick I’ve got a license, registered before I even used it. I don’t know how to get the Beta though. Care to share?
I’m doing alright with it, but I am still learning. I set up a “Base” profile that works on most of the default planes, then I start a new profile using that Base, and tweaking for the plane I’m flying. I take it that is the correct way to go about it?
-
@Cdr_Maverick is there a full list of all LVAR's available for the arrow?
