Start fuel overflow - instant wet plugs
-
ms2020 - 114NA
Watched other video starts - no issues.
Even with a short burst of prime fuel: -mix open, throttle cracked open: start cranking, the cylinders instantly are flowed with fuel.
I have to start with mix fully closed, and open when fired up. None of video start up need to do this.
And none of other BS aircraft have this problem
. I am very careful to lean all the time. Even TO and landing I have some lean. Shutdown I always run at 1500 rpm, and slowly lean to cutoff for a good plug clean.
.
Not sure how to read tablet. Fuel line left from venturi , is it prime fuel? I cannot find the mixture valve either. Would help for troubleshooting to find location of it.. - BTW saving is a mess, but I guess you know it.
Thanks for plane! Hard to imagine it did ground the Bonanza.
-
ms2020 - 114NA
Watched other video starts - no issues.
Even with a short burst of prime fuel: -mix open, throttle cracked open: start cranking, the cylinders instantly are flowed with fuel.
I have to start with mix fully closed, and open when fired up. None of video start up need to do this.
And none of other BS aircraft have this problem
. I am very careful to lean all the time. Even TO and landing I have some lean. Shutdown I always run at 1500 rpm, and slowly lean to cutoff for a good plug clean.
.
Not sure how to read tablet. Fuel line left from venturi , is it prime fuel? I cannot find the mixture valve either. Would help for troubleshooting to find location of it.. - BTW saving is a mess, but I guess you know it.
Thanks for plane! Hard to imagine it did ground the Bonanza.
@eker Indeed, this is the new fuel injector behavior mentioned above, which was much requested by my users. Let me know if you have any questions.
. - BTW saving is a mess, but I guess you know it.
I have received almost no complaints with my new state saving system, actually, which has been a delightful surprise, given that I'm still forced to use Asobo's cloud system. Can you elaborate at all, please?
-
@eker Indeed, this is the new fuel injector behavior mentioned above, which was much requested by my users. Let me know if you have any questions.
. - BTW saving is a mess, but I guess you know it.
I have received almost no complaints with my new state saving system, actually, which has been a delightful surprise, given that I'm still forced to use Asobo's cloud system. Can you elaborate at all, please?
@Black-Square @eker Only issues I know of with the state saving is when you do not exit the sim using exit to desktop from the main menu. Aside from that occasionally the last thing I changed (for example closing the door of the aircraft) doesn't save presumably because I exited to the menu without giving enough time for the change to save to the cloud. If I wait a little bit after my last change before exiting to the menu and then close the sim normally I haven't had any issues myself.
Also normal start does call for Mixture ICO for this particular engine...
https://www.youtube.com/watch?v=fCxXdixDER0
