B58TC fuel mixture lever initial position on startup
Baron Professional
1
Posts
1
Posters
34
Views
2
Watching
-
Hi. Amamzing plane.
I have the original manual of the TC model and in the check list is different about the mixture lever initial position during startup.- Propeller Control - HIGH RPM
- Mixture Control - IDLE CUT-OFF
- Battery Switch ON
- Boost Pump ON
- Start Engine:
COLD STARTS
a. Throttle 1/2 OPEN
b. Mixture Control FULL RICH for 2 to 3 seconds prime, then to IDLE CUT-OFF
c. Throttle - 1/2-INCH OPEN
d. Magneto/Start Switch START
e. When engine starts, return the Magneto/Start switch to BOTH. Slowly advance the mixture control to FULL RICH.Thank you.