3D model antenna modelling
-
You have modelled 2 ADFs inside the cockpit but only 1 is present on the fuselage? That's weird haha
It's also incorrectly modelled as well. It's not even an ADF antenna..Additionally some other antennas are missing and incorrectly modelled at the front of the fuselage. Hope you can correct these things because the exterior is as important as the cockpit, at least for my wallet.
-
The reference aircraft we use for the interior and exterior models can often be different, as we choose the best reference material we have to complete the work. In the case of the F70 & F100, the aircraft we used for our exterior modelling was fitted with one ADF system, and the aircraft we used for our interior modelling was fitted with two ADF systems. We'll log this feedback on our internal trackers to investigate the possibility of adding a second ADF receiver to the exterior in a future update.
The model of the ADF receiver on the exterior matches our reference material; however, we are always open to receiving any additional reference material. If you would like to share any reference material with us, the best way to do that would be by opening a ticket with Just Flight Support via the following link, and then we can ensure it gets passed on to the relevant department: https://www.justflight.com/support
Mark - Just Flight
-
Hi Mark, I see. I understand now why only ADF was modelled. Please do consider adding a second ADF receiver since this is simulated, as well as having a look at the other antennas on top of the fuselage. I believe if you crosscheck the top of the fuselage with the real thing you will see there are also 2 little dot antennas missing. Maybe they were also not anymore on the aircraft which you used as a reference, but all the aircraft currently in use have it.
Since I am not a customer yet, I am unable to create a ticket. Through the following link you can see what I mean. https://imgur.com/a/1Hml1BE
TLDR:
ADF modelled incorrectly for sure and one is missing.
2 little dot antenna's missing.Dennis
-
Hi Mark, I understand now why only one was modelled instead of two but please do consider it.
The ADF is also incorrectly modelled, it is not a TCAS antenna..Since I am not a customer yet I can not open link. I leave you my findings here.
ADF incorrectly modelled
2 little dot antennas missing (all current Fokker 100s have this)https://imgur.com/a/1Hml1BE
Dennis
