3D model antenna modelling
-
You have modelled 2 ADFs inside the cockpit but only 1 is present on the fuselage? That's weird haha
It's also incorrectly modelled as well. It's not even an ADF antenna..Additionally some other antennas are missing and incorrectly modelled at the front of the fuselage. Hope you can correct these things because the exterior is as important as the cockpit, at least for my wallet.
-
The reference aircraft we use for the interior and exterior models can often be different, as we choose the best reference material we have to complete the work. In the case of the F70 & F100, the aircraft we used for our exterior modelling was fitted with one ADF system, and the aircraft we used for our interior modelling was fitted with two ADF systems. We'll log this feedback on our internal trackers to investigate the possibility of adding a second ADF receiver to the exterior in a future update.
The model of the ADF receiver on the exterior matches our reference material; however, we are always open to receiving any additional reference material. If you would like to share any reference material with us, the best way to do that would be by opening a ticket with Just Flight Support via the following link, and then we can ensure it gets passed on to the relevant department: https://www.justflight.com/support
Mark - Just Flight
