GNS 530 #2 is mirroring NAV/COM 1

tttocs

I had to re-install MSFS 2024 and all aircraft following a drive failure and I'm running into a strange issue with the TBM 850 that I've not seen before. The number 2 GNS 530 seems to be mirroring the #1 unit whether I'm using the TDS GTN 750 or the GNS 530 as Nav/Com 1. If i use the TDS unit as #1 and the King Nav/Com as #2 both units work properly.

I've tried wiping (Including removing the state file manually) and re-installing and the problem persists. Does anyone have any idea what's going on here?

Scott

Black Square

I can look into this later, but what exactly is mirroring? The radio frequencies?

tttocs

Sorry - I mean no matter if the first GPS is the TDS GTN 750 or the WT GNS 530 the second WT GNS 530 always acts as Com1/Nav1, resulting in two #1s. If I swap out the second GNS 530 for the standard Nav/Com radio it behaves as Com2/Nav2 as it should.

Hope that's clearer.

tttocs

Just giving this a quick bump. This is probably a config setting somewhere, but I've no idea where. Does anyone have any idea? I really want to be able to use the 530 as the second nav/com unit, but can't right now.

karelvermeersch

I’m having the same issue.
Com and n.a.v. frequenties are taken over between units, both ways
Also changing cdi source is taken over, its mirroring the primary unit.
In my case the TDS 750