STAND BY light INOP still an issue in 2020 and tried everything waiting for update v1.2
-
You need to turn on the standby power switch
-
STBY ALT PWR OFF. No matter what I do I can not get this to go out. This after the update.
will Version 1.2 update fix this
@cessna172
Light (Nr 1) is on because Switch (Nr 2) is in the off position. You need to turn the standby alternator ON (Nr 2). Only then the Light (Nr 1) will turn off.To answer your question, no update will fix this because it does work as intended.
-
@cessna172
Light (Nr 1) is on because Switch (Nr 2) is in the off position. You need to turn the standby alternator ON (Nr 2). Only then the Light (Nr 1) will turn off.To answer your question, no update will fix this because it does work as intended.
@RealPax no it dose not. I can turn it on right after startup and it will stay on the entire flight. I'm on 1.1 or what ever the first update was...
-
@RealPax no it dose not. I can turn it on right after startup and it will stay on the entire flight. I'm on 1.1 or what ever the first update was...
@X1aviation
Well based on the picture it must be on because the switch is off. Why it does not work for you is hard to judge. If you like you can upload a Pic. Only this way we could trouble shoot.In case you upload pics pls. make sure the cockpit is shown incl. the power settings. Make sure the failure page on the tablet does not show any failure and just to be on the safe side. Push the generator switch towards "reset" one time.
EDIT:
There has been a similar discussion shortly after release. You might look this up as well.
https://community.justflight.com/topic/10343/stby-elec-pwr-inop-light-during-preflight
As far as I remember it was a wrong binding that caused the issue.But again, based on the provided picture the light must be on because the standby alternator is switched OFF.
-
@X1aviation
Well based on the picture it must be on because the switch is off. Why it does not work for you is hard to judge. If you like you can upload a Pic. Only this way we could trouble shoot.In case you upload pics pls. make sure the cockpit is shown incl. the power settings. Make sure the failure page on the tablet does not show any failure and just to be on the safe side. Push the generator switch towards "reset" one time.
EDIT:
There has been a similar discussion shortly after release. You might look this up as well.
https://community.justflight.com/topic/10343/stby-elec-pwr-inop-light-during-preflight
As far as I remember it was a wrong binding that caused the issue.But again, based on the provided picture the light must be on because the standby alternator is switched OFF.
@RealPax i will do that latter on when I get home and will incorporate as much info as I can on this.
Only have time for a small 30 min flight or so tonight.
