Another request...
-
Use Throttle Axis 1 (0-100) and add a little dead zone around the middle of your throttle.
I think that'll do the trick.
@jmarkows I have HC bravo, so I have always just used the "hold throttle decrease" assignment for the back part of the throttle so I can easily go btwn flight idle and ground idle positions. I was just curious if the dead-zone for flight idle could be larger and I hardly think cutting my axis in half will help. If anything that will make it 50% smaller.
-
@Black-Square On another note, I just want to take the time to say congrats and thank you for the release. I'm not terrible interested in the caravan and I mainly bought it to show support (though I am always happy to have another black square aircraft). From what I've seen in the discord servers I'm in there are a lot of people really enjoying the plane. I'm sure it comes from all of us that we really appreciate what you do.
-
@jmarkows I have HC bravo, so I have always just used the "hold throttle decrease" assignment for the back part of the throttle so I can easily go btwn flight idle and ground idle positions. I was just curious if the dead-zone for flight idle could be larger and I hardly think cutting my axis in half will help. If anything that will make it 50% smaller.
@SadBucket said in Another request...:
@jmarkows I have HC bravo, so I have always just used the "hold throttle decrease" assignment for the back part of the throttle so I can easily go btwn flight idle and ground idle positions. I was just curious if the dead-zone for flight idle could be larger and I hardly think cutting my axis in half will help. If anything that will make it 50% smaller.
That puts idle in the center, so farther back goes into beta and reverse without needing a button.
-
@SadBucket said in Another request...:
@jmarkows I have HC bravo, so I have always just used the "hold throttle decrease" assignment for the back part of the throttle so I can easily go btwn flight idle and ground idle positions. I was just curious if the dead-zone for flight idle could be larger and I hardly think cutting my axis in half will help. If anything that will make it 50% smaller.
That puts idle in the center, so farther back goes into beta and reverse without needing a button.
-
It should be the same as all my other turbine aircraft in that respect, but if you really want to change it, I can give you some custom code that should do the trick.
-
It should be the same as all my other turbine aircraft in that respect, but if you really want to change it, I can give you some custom code that should do the trick.
@Black-Square Honestly I regret asking to trouble you, but if it's a really quick for you I'm happy to accept the offer.
-
I was going to send you something to try, but after looking at the code, it would be more difficult to change than I thought. If you're still struggling after some more flying, and after I've gotten through the first day or two of replies, we can come back to this, if you like
-
I was going to send you something to try, but after looking at the code, it would be more difficult to change than I thought. If you're still struggling after some more flying, and after I've gotten through the first day or two of replies, we can come back to this, if you like
@Black-Square All good haha
-
I agree. I’d rather have less Reverse Range- irl you also need to pull up a lock before engaging Beta, whereas Beta to reverse is only a spring
