Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
Collapse
Just Flight Community Forum
  1. Home
  2. Just Flight
  3. MSFS Products
  4. F70 & F100 Professional
  5. IMM DES Function Not Working

IMM DES Function Not Working

Scheduled Pinned Locked Moved F70 & F100 Professional
16 Posts 3 Posters 618 Views 1 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • A Airmils4774

    @JabbyJabara , no warning lights or status errors.

    Seems like I’m the only one having this issue. I’m starting to think there might be a conflict with one of my installed mods or something. I’m going to remove all the mods from the Community folder and give it another try. I’ll let you know how it goes!

    J Offline
    J Offline
    JabbyJabara
    wrote on last edited by
    #7

    @Airmils4774 Yes that is a possibility. I myself am not heavily modded so it could be that. Good luck. Feel free for any other questions

    1 Reply Last reply
    0
    • A Offline
      A Offline
      Airmils4774
      wrote on last edited by Airmils4774
      #8

      @JabbyJabara
      @Gatlingorange

      Testing with a vanilla sim and zero mods active brought no success.
      A short video clip is attached below—any help spotting the issue would be greatly appreciated!

      https://limewire.com/d/yENRM#2cLkBoisy2

      GatlingorangeG 2 Replies Last reply
      0
      • A Airmils4774

        @JabbyJabara
        @Gatlingorange

        Testing with a vanilla sim and zero mods active brought no success.
        A short video clip is attached below—any help spotting the issue would be greatly appreciated!

        https://limewire.com/d/yENRM#2cLkBoisy2

        GatlingorangeG Offline
        GatlingorangeG Offline
        Gatlingorange
        wrote on last edited by Gatlingorange
        #9

        @Airmils4774 I don't see anything off. I have just landed the F70 on ENVA and had no troubles with the IMM DES. I will fire up the sim and fiddle around to see if I can troubleshoot anything.

        1 Reply Last reply
        0
        • A Airmils4774

          @JabbyJabara
          @Gatlingorange

          Testing with a vanilla sim and zero mods active brought no success.
          A short video clip is attached below—any help spotting the issue would be greatly appreciated!

          https://limewire.com/d/yENRM#2cLkBoisy2

          GatlingorangeG Offline
          GatlingorangeG Offline
          Gatlingorange
          wrote on last edited by Gatlingorange
          #10

          @Airmils4774 I managed to replicate your issue by following my normal procedure, but by leaving out any approach planning. IMM DES will engage, however it will not descent (see screenshot).

          I then loaded in another flight and purposely left the INIT page blank (yikes) and flew without PROF. Just to rule out that you might have missed something there. I then proceeded to load in the STAR and RWY, and nothing else descent/approach related in the FMS. In this flight DES armed and went down to 1000V/S.

          Could that be your problem? I purposely dumbed down the workload and only missing STAR + RWY seemed to trigger it.

          Microsoft Flight Simulator 2024 Screenshot 2026.10.14 - 22.06.35.91.png

          According to @JabbyJabara it shouldn't have worked without the INIT page. Guess that's on JF's end. Might open a ticket for the next patch then!

          1 Reply Last reply
          0
          • A Offline
            A Offline
            Airmils4774
            wrote on last edited by
            #11

            @Gatlingorange

            Thank you very much for all the effort you took to test this.

            I think the problem might actually be caused by the SimBrief import option then.
            My workflow is to use the simbrief import option and then program the SID / RWY and expected STAR and arrival RWY before departure, with the Init A and B pages completely filled out, of course.

            So, at the moment of activation (in PROF mode), the STAR and runway are already known.

            Do you program the CDU manually, or do you also use the import function?

            GatlingorangeG 1 Reply Last reply
            0
            • A Airmils4774

              @Gatlingorange

              Thank you very much for all the effort you took to test this.

              I think the problem might actually be caused by the SimBrief import option then.
              My workflow is to use the simbrief import option and then program the SID / RWY and expected STAR and arrival RWY before departure, with the Init A and B pages completely filled out, of course.

              So, at the moment of activation (in PROF mode), the STAR and runway are already known.

              Do you program the CDU manually, or do you also use the import function?

              GatlingorangeG Offline
              GatlingorangeG Offline
              Gatlingorange
              wrote on last edited by
              #12

              @Airmils4774 I import the OFP through the EFB, load with GSX and import the simbrief route through the CDU. At cruise I load the expected STAR and RWY and plan accordingly. If it's a short hop, like EHAM-EBBR, I preload. Can't remember if I used IMM DES on that particular flight.

              1 Reply Last reply
              0
              • A Offline
                A Offline
                Airmils4774
                wrote on last edited by
                #13

                @Gatlingorange

                So that's almost exactly the same workflow I use, except that I load the STAR and runway before takeoff.
                I'm going to test your method to see if I can get it working, and I'll report back here with my findings.
                If it works, that suggests the IMM DES function is pretty finicky.
                I cannot believe that this is the case in the real aircraft.
                It's pretty standard for fuel and VNAV calculations to include the STAR and runway in the CDU before departure i thought?

                I will also file a ticket with Just Flight regarding the empty INIT page finding.
                To be continued...

                1 Reply Last reply
                1
                • GatlingorangeG Offline
                  GatlingorangeG Offline
                  Gatlingorange
                  wrote on last edited by
                  #14

                  Cool, let us know!

                  1 Reply Last reply
                  0
                  • A Offline
                    A Offline
                    Airmils4774
                    wrote last edited by
                    #15

                    @Gatlingorange

                    Well, I've tried entering the STAR and runway mid-flight, but unfortunately, that didn't help either.

                    I could see the TOD marker, and after ATC confirmed which STAR and runway I should use, I entered them into the CDU. I then selected a lower altitude and pulled the altitude knob. IMM DES became active, but after activating it, I ran into exactly the same issue as before.

                    I've also completely reinstalled the simulator after Sim Update 7, as well as the F70 and F100, but I still can't get it to work.

                    I'm honestly running out of ideas, and I really don't know what I'm doing differently from you.

                    If it's not too much trouble, would you mind giving me a step-by-step explanation of how you do it? I'd really appreciate it!

                    1 Reply Last reply
                    0
                    • A Offline
                      A Offline
                      Airmils4774
                      wrote last edited by
                      #16

                      Just leaving this here in case anyone runs into the same issue in the future.

                      I managed to get it working, but you need to make sure the following is set up correctly:

                      • Arrival runway must be selected.
                      • STAR must be entered (it won't work without one).
                      • DES FORECAST must be filled in, including all three fields.
                      • Arrival airport weather must also be entered.

                      Once all of these are set correctly, it should work.

                      If you follow the tutorial flight exactly, step by step, it actually works. That's how I eventually figured it out myself!

                      As far as I'm concerned, this topic can now be marked as resolved and closed.

                      1 Reply Last reply
                      0
                      Reply
                      • Reply as topic
                      Log in to reply
                      • Oldest to Newest
                      • Newest to Oldest
                      • Most Votes


                      • Login

                      • Don't have an account? Register

                      • Login or register to search.
                      • First post
                        Last post
                      0
                      • Categories
                      • Recent
                      • Tags
                      • Popular
                      • Users