Few issues with the 1.1 patch
-
@SkipperMacz What primary and secondary avionics are you using in the Commander?
@fizzboy 750 and 530 ... but I'm not tracking a flight plan, just flying a heading hold.
Correction: 750 & 650!
-
... and after further flying I can confirm that in HDG mode I can rotate the DG anywhere and the autopilot still tracks the requested magnetic heading via the heading bug.
-
Just so you guys know, this behavior likely differs depending on the avionics used. I've programmed it so it works with the native autopilot, but other GPS units may carry their own autopilots, which I have no control over.
-
Just so you guys know, this behavior likely differs depending on the avionics used. I've programmed it so it works with the native autopilot, but other GPS units may carry their own autopilots, which I have no control over.
@Black-Square ... it doesn't make sense (to me lol) that the Heading mode should be dependent on the avionics installed. But who ever suggested that Asobo's internals made sense. Next flight (tomorrow probably) I'll test it without the fancy GPS's and see what happens.
-
Ok, so I finally got to fly again and remembered to test a different avionics installation and guess what - with the simplest, no gps, setup of MX 170B com/nav radios, HDG mode operates as expected - the heading tracks the heading bug irrespective of what the directional gyro is reading. So to fly a consistent heading, you need to keep the DG synchronised with the correct magnetic heading.
As soon as I reinstall the previous GTN750/GTN650 gps pair, HDG mode tracks the magnetic compass ... which feels like cheating lol.
I haven't tried any of the other avionics yet.
-
-
Everything works aside from mixture for me. All my AAO axis assignments and Mobiflight button config is great. Just the mixture! No idea why
-
@SkipperMacz You may want to check with PMS to see if that heading behavior is intentional or a bug.
-
@sbanks75 Mixture is broken for me too using the joystick assignments that worked perfectly before the update and work on every other aircraft.
-
@SkipperMacz To confirm, there is no separate slaved heading source in the Commander 114.
The reason you're seeing this is because these third-party GPS units seem to bypass a lot of the aircraft's actual systems logic and pull heading/air-data information directly from the sim. It also explains why Heading Up and wind speed/direction still work even while stationary on the ground (on the TDS at least, not sure about PMS). I know it is possible to code around it (I believe A2A did with WASM), but we haven't quite pushed Nick to the breaking point where he will start using WASM... yet...
